Utilise donc webmin, très didactique.. On 02/03/14 15:21, Philippe Strauss wrote: > Vos settings pour blinder qque peu la couche réseau de linux, c quoi? > > après un peu de cookbooking GRACE A GOOGLE, on en sort pas : > > /etc/sysctl.conf : > > > net.ipv4.ip_forward = 0 > net.ipv4.conf.default.rp_filter = 1 > net.ipv4.conf.default.accept_source_route = 0 > kernel.sysrq = 0 > kernel.core_uses_pid = 1 > net.ipv4.conf.all.send_redirects = 0 > net.ipv4.conf.default.send_redirects = 0 > net.ipv4.conf.all.accept_source_route = 0 > net.ipv4.conf.all.accept_redirects = 0 > net.ipv4.conf.all.secure_redirects = 0 > net.ipv4.conf.all.log_martians = 1 > net.ipv4.conf.default.accept_source_route = 0 > net.ipv4.conf.default.accept_redirects = 0 > net.ipv4.conf.default.secure_redirects = 0 > net.ipv4.icmp_echo_ignore_broadcasts = 1 > net.ipv4.tcp_syncookies = 1 > net.ipv4.conf.all.rp_filter = 1 > net.ipv4.conf.default.rp_filter = 1 > net.ipv4.conf.all.arp_accept = 0 > net.ipv4.conf.all.arp_ignore = 2 > net.ipv4.conf.all.arp_announce = 1 > net.ipv4.conf.all.arp_filter = 1 > net.ipv6.conf.all.forwarding = 0 > net.ipv6.conf.all.accept_source_route = 0 > net.ipv6.conf.all.accept_redirects = 0 > net.ipv6.conf.default.router_solicitations = 0 > net.ipv6.conf.default.accept_ra_rtr_pref = 0 > net.ipv6.conf.default.accept_ra_pinfo = 0 > net.ipv6.conf.default.accept_ra_defrtr = 0 > net.ipv6.conf.default.autoconf = 0 > net.ipv6.conf.default.dad_transmits = 0 > net.ipv6.conf.default.max_addresses = 1 > kernel.randomize_va_space = 2 > >
_______________________________________________ gull mailing list [email protected] http://forum.linux-gull.ch/mailman/listinfo/gull
