And, me again. I've probably not finally tested everything on IBM J9 -
the same problem appears while using the dropdown button in WM6. so of
course, it is a JVM (J9) problem - phoneme does not produce the error.
Even using the "...forJ9"-version with phoneme works fine.
BTW, in fact, the coordinates are not displayed until i close the drop
down menu! and even when they are displayed, they won't be updated -
until i open AND close the dropdown menu again.
And additionally, it is the same with the MEASURES_BAR...while viewing
coordinates. They are only displayed and updated after open/close of the
drop down menu.
Obviously, as the statusbar worked before adding anything to the code,
it is my fault. But I don't understand, why phoneme does not reproduce
the error.
After changing from combo to normal menu, the error still exists. I'll
test everything right from the beginning...and hope to find the error.
If anybody has got an idea, I would appreciate it for saving time :)
Regards,
Marcel Schoolmeesters
Am 05.04.2011 14:11, schrieb Marcel Schoolmeesters:
Ah, I forgot the picture. But as I said, it seems to be a problem of
the drop down which I added to the gpsbar. but why is it shown
correctly with phoneme?
Am 05.04.2011 14:08, schrieb Marcel Schoolmeesters:
Thanks, my comments are between the lines :)
Regards
Marcel
Am 05.04.2011 13:41, schrieb Juan Lucas Dominguez Rubio:
Hello,
> however, the statusbar was not shown and the coordinates were
> shown above the toolbar...a bit strange.
unheard-of... can you send pictures of that?
well, I've looked at my pictures again. I did not have much time
while testing as it is not my own device. So I checked them again and
it seem to be a problem of the dropdown button. The downloaded (not
changed) version it works fine :) however, with phoneme the problem
does not exist...
> In addition, some visual
> aspects changed, like white and black are replaed by each other, I
think.
could that be the device's own look-and-feel?
well as mentioned before, I cannot check it again...at least not at
once...but I think, some symbols are missing...I cannot clearly say,
perhaps I need to check it again next weekend for example...perhaps I
can get the device again.
> ...was not shown in ToC ...
the layer name in the TOC is the only place where you can see
missing words?
cannot tell exactly, did not have much time to check everything...I
hope, I can check it again.
As for the permission dialogs: that's normal. some devices ask the
user before using executable files (exe and dll) then keep a record
of "allowed files", so they dont ask again unless you reinstall the
software. that's actually a configurable feature of windows mobile.
Most PDA have it disabled by default.
ok, I thought so...
If someone is interested in tuning that sort of thing, you can use
for example CeRegEditor: http://ceregeditor.mdsoft.pl/
Regards,
Juan Lucas Domínguez Rubio
---
Prodevelop SL, Valencia (España)
Tlf.: 96.351.06.12 -- Fax: 96.351.09.68
http://www.prodevelop.es <http://www.prodevelop.es/>
---
------------------------------------------------------------------------
*De:* [email protected] en nombre de
Marcel Schoolmeesters
*Enviado el:* mar 05/04/2011 12:51
*Para:* Users and Developers mailing list
*Asunto:* Re: [Gvsig_english] using gvsig mobile with internal gps /
using itonwm 6.5
ok, thanks for the comments,
I tested it on an Sasung Omnia GT-B7610 yesterday, and I've tested
both, J9 and PhoneME...of course, I have deleted the dll, as I have
read the information before ;) but however, the statusbar was not
shown and the coordinates were shown above the toolbar...a bit
strange. In addition, some visual aspects changed, like white and
black are replaed by each other, I think.
With phoneme, the statusbar was shown correctly. but the layername
was not shown in ToC (so it cannot be deleted, only disabled) - in
phoneME I have used the current version, placed the folder in device
directory and installed gvsig mobile and before starting, started
config.exe, right?
Well, I've got many dll-requests which I had to confirm before it
would continue...but I think, the request does not come twice?
About GPS, I'll test perhaps later, but that's ice to know, that it
should work with assigning a serial port to it.
Regards,
Marcel
Am 05.04.2011 12:09, schrieb Rahkonen Jukka:
Hi,
When it comes to internal GPS, all the units I have been using
have been assigning the GPS into one of the serial ports. Some
have had this as an option for some other native communication
port. The PDA can have a selection in the GPS settings
for giving the number of the virtual serial port to be used for
output, and gvSIG Mobile must be configured to use the same
port. I have been using gvSIG Mobile with a few Trimble models,
M3 Mobile PDA and Thales Mobile Mapper.
-Jukka Rahkonen-
------------------------------------------------------------------------
*Lähettäjä:* [email protected]
[mailto:[email protected]] *Puolesta
*Juan Lucas Dominguez Rubio
*Lähetetty:* 5. huhtikuuta 2011 12:59
*Vastaanottaja:* Users and Developers mailing list; Users and
Developers mailing list
*Aihe:* Re: [Gvsig_english] using gvsig mobile with internal gps
/ using itonwm 6.5
Hello, yes it should work also on WM 6.5
If you are using the J9 version, you need to remove one of
the DLL files under \J9 folder:
\J9\PPRO11\bin\j9jit23.dll
Also, what do these files say?
\gvSIGMobile\g_mobile_launch_log.txt
\gvsig_mobile_is_alive.txt
(this one is in the root of the file system)
Regards,
Juan Lucas Domínguez Rubio
---
Prodevelop SL, Valencia (España)
Tlf.: 96.351.06.12 -- Fax: 96.351.09.68
http://www.prodevelop.es <http://www.prodevelop.es/>
---
------------------------------------------------------------------------
*De:* [email protected] en nombre
de Marcel Schoolmeesters
*Enviado el:* mar 05/04/2011 0:39
*Para:* Users and Developers mailing list
*Asunto:* [Gvsig_english] using gvsig mobile with internal
gps / using it onwm 6.5
Hello,
anybody used gvsig mobile with WM 6.5 ?
I am trying to emulate it with WM 6.5.3 DTK, but it does not
seem to work.
Additionally, is it possible to use the internal GPS?
without Serial
port? or does it have an assigned serial port in windows
mobile? does
anybody know?
Best regards,
Marcel
_______________________________________________
Gvsig_internacional mailing list
[email protected]
http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
_______________________________________________
Gvsig_internacional mailing list
[email protected]
http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
_______________________________________________
Gvsig_internacional mailing list
[email protected]
http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
_______________________________________________
Gvsig_internacional mailing list
[email protected]
http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
_______________________________________________
Gvsig_internacional mailing list
[email protected]
http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
_______________________________________________
Gvsig_internacional mailing list
[email protected]
http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
