Hi Doug,
I still don't have any engines under ECI eloquence 6.1. I used the 6.1 cd
to remove Eloquence V5. Af ter restarting the system, I was using the
TrippleTalk and was able to get the ECI version up and running. I changed
back to the TrippleTalk and reinstalled Eloquence V5. I check to see if the
V6 version of Eloquence still had all it's engines. They were all there.
I then selected The SAPI synthesizer and the V5 engines were present. I did
not select or start the v5 engine but instead I pressed esc and hit inter
which took me back to the TrippleTalk. I then went back to the synthesizer
dialogue and none of the ECI v6 engines were there.
Robert
----- Original Message -----
From: "Doug Geoffray" <[EMAIL PROTECTED]>
To: "list info" <[email protected]>
Sent: Wednesday, June 25, 2008 1:12 PM
Subject: Re: Window-Eyes 7.0 Beta 1 Is Now Available!
David,
As mentioned, the new 6.1 Eloquence only has issues with version 5
Eloquence. So if you go to your add/remove you can safely remove anything
that reference Eloquence 5. If you don't see a 5 in the name then you
don't need to touch it. Since JAWS doesn't use 5 this won't effect them.
Regards,
Doug
David Tanner wrote:
Hi,
I hope you don't get a load of this same question, but since I need both
WE and Jaws on my systems at work I am wondering if there is an easy way
to identify which Eloquence to uninstall or if I need to leave them all
there?
----- Original Message ----- From: "Aaron Smith" <[EMAIL PROTECTED]>
To: "Darren Harris" <[EMAIL PROTECTED]>
Cc: <[email protected]>
Sent: Tuesday, June 24, 2008 1:01 PM
Subject: Re: Window-Eyes 7.0 Beta 1 Is Now Available!
Please be sure to read through the readme, as the interaction between
the version of Eloquence is detailed. Installing the beta will not
change your synthesizer. If you have the SAPI version of Eloquence
installed, and you want to try the new Eloquence, you should switch to
the DEC32 for Window-Eyes first, and then switch to Eloquence. If you're
not using Eloquence with any other software, then we recommend removing
it to avoid any unwanted complications.
Aaron
Darren Harris wrote:
Right thanks.
So right now I am using the elequence with the sappy at present. So can
I download, install the new upgrade and would it change the synthosizer
by default? If so then by looking at the knowledge base I would need to
change back to dectalk32 first. Or is it safe or I should say will it
be
safe to install it first.
-----Original Message-----
From: Aaron Smith [mailto:[EMAIL PROTECTED] Sent: 24 June 2008 18:50
To: Darren Harris
Cc: [email protected]
Subject: Re: Window-Eyes 7.0 Beta 1 Is Now Available!
Darren Harris wrote:
will the downloadable upgrade include the new spech synthosizer as
well?
Yes. The new ECI Eloquence synthesizer is built into Window-Eyes just
like the DECtalk Access 32 (Window-Eyes) synthesizer.
Aaron
--
To insure that you receive proper support, please include all past
correspondence (where applicable), and any relevant information
pertinent to your situation when submitting a problem report to the GW
Micro Technical Support Team.
Aaron Smith
GW Micro
Phone: 260/489-3671
Fax: 260/489-2608
WWW: http://www.gwmicro.com
FTP: ftp://ftp.gwmicro.com
Technical Support & Web Development
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and
can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[EMAIL PROTECTED] and include leave gw-info in the body of the
message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and
can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[EMAIL PROTECTED] and include leave gw-info in the body of the
message.
--
Doug Geoffray
GW Micro, Inc.
Voice 260-489-3671
Fax 260-489-2608
http://www.gwmicro.com
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and
can be searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[EMAIL PROTECTED] and include leave gw-info in the body of the message.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.
All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be
searched through and sorted using the search
form at the bottom of the page.
If you wish to unsubscribe from this list, send a message to
[EMAIL PROTECTED] and include leave gw-info in the body
of the message.
