Hi well why not use auto hot key to find out what the key codes are then right a auto hot key script that will disable this for you at boot up.
-----Original Message----- From: Pat Ferguson [mailto:[email protected]] Sent: Monday, March 02, 2009 2:14 PM To: [email protected] Subject: Re: netbooks and Intel Graphics Adaptor Dear Albert, Sorry, but that didn't work. I tried it. Someone told me that the FN key and Page up was home, and the FN key and Page Down was End, but that doesn't work, either, unless I don't know where the page up and page down keys are. I did get the hot keys for the screen turned off. Now the Window-Eyes control-arrow hot keys work great. Does this mean that I can not shut off the mouse pad now? Oh, just so you all know, the FN key and f7 shuts off the mouse, but you have to do this each time you reboot the computer. Thanks a bunch. Pat Ferguson Thanks a bunch. At 03:35 PM 3/2/2009, you wrote: >Hi Pat, > >To use the home and end keys, you have to use it in conjunction with >the fn key (usually located next to the left control key) and the >left arrow key (home) and the right arrow key (end). > >So if you want the home key, you will press the fn key and the left >arrow key together. fn and up arrow is pgup and fn and down arrow is pgdn. > >Try it out and let me know if this works. > >Albert > >----- Original Message ----- From: "Pat Ferguson" <[email protected]> >To: <[email protected]> >Sent: Tuesday, March 03, 2009 5:19 AM >Subject: Re: netbooks and Intel Graphics Adaptor > > >>Hi Everyone, >> >>Can this also be done from within the System Tray? >> >>Does anyone know where to find the End and Home keys on these >>netbooks? I haven't found them yet, and I use them a lot. >> >>Thanks. >> >>Pat Ferguson >> >>A >>t 11:33 PM 2/28/2009, you wrote: >>>Hi, >>> >>>Just a note, when trying to do this on my desktop we were not able >>>to get to the hotkey options this way, so here may be another >>>alternative if the KB route doesn't work. The "Hotkey" options >>>could be found with the mouse. So, once I clicked on the Intel >>>Graphics in the control panel, then I just used the mouse from the >>>top to move down until I found "hotkeys" then clicked on it and >>>took care of the checkbox and tabbed over to the "ok" button. >>> >>>I did not perform this on a NetBook just a desktop. >>> >>>Lori >>> >>>----- Original Message ----- From: "Jim Grimsby Jr." <[email protected]> >>>To: "'Andy Baracco'" <[email protected]> >>>Cc: <[email protected]> >>>Sent: Sunday, March 01, 2009 12:23 AM >>>Subject: RE: netbooks >>> >>> >>>> >>>>GWKB1022 : Speech Parameter Hot Keys Do Not Speak >>>>Product >>>>: >>>>Window-Eyes >>>>Category >>>>: >>>>Solution >>>>Author >>>>: >>>>Aaron Smith >>>>Date Added >>>>: 09/22/2005 >>>>Last Modified >>>>: 10/17/2007 >>>>Symptom: >>>>Using Window-Eyes 5.0, or greater, when pressing the Speech Paramters hot >>>>keys (CTRL-ARROW >>>>KEYS by default) Window-Eyes will not indicate the current speech parameter >>>>setting. >>>>Cause: >>>>An Intel video application running in the background uses these keys to >>>>modify various >>>>video settings, such as screen rotation. >>>>Solution: >>>>You will need to disable the Intel hot keys, by performing the following >>>>general >>>>steps: >>>>1. Open the Windows control panels >>>>2. Open the Display control panel >>>>3. Select the Settings tab >>>>4. Select the Advanced button >>>>5. Select the Intel(R) Extreme Graphics option >>>>6. Select the Graphics Properties option >>>>7. Select the HotKeys option >>>>8. Uncheck Enable Hot Keys option >>>>You may also be able to open the Graphic Properties options using >>>>CTRL-ALT-F12. >>>> >>>>-----Original Message----- >>>>From: Andy Baracco [mailto:[email protected]] >>>>Sent: Saturday, February 28, 2009 8:58 PM >>>>To: [email protected] >>>>Subject: Re: netbooks >>>> >>>>In XP, go to Control Panel, and look for something like Intel >>>>Graphics. Hit enter, and go through the options until you see >>>>something like "Enable quick keys". uncheck the box and make sure >>>>that you hit all the OK's on the way out. >>>> >>>>Andy >>>>At 09:30 AM 2/28/2009, you wrote: >>>>>How does one go about doing that? <smile> >>>>> >>>>>Thanks. >>>>> >>>>>Pat Ferguson >>>>> >>>>> >>>>>At 09:06 AM 2/28/2009, you wrote: >>>>>>Hello Pat. All of the computers with an Intel video card do this. >>>>>>When you press control-alt-arrow keys, they rotate your screen. You >>>>>>will have to disable the intel graphic card hot keys from its >>>>>>options. Once you do this, they will work to adjust the speech >>>>>>on the fly. >>>>>> >>>>>>Many thanks. >>>>>> >>>>>>Pat Ferguson wrote the following on 2/27/2009 12:00 PM: >>>>>>>Hi Everyone, >>>>>>>I'm loving my Acer Aspire 1 Netbook, because the numpad is just like >>>>this: >>>>>>>FN key: J, K, L. >>>>>>>FN Key: U, I, O. >>>>>>>FN Key: 7, 8, and 9. >>>>>>>Now, I haven't figured out where the numpad slash for the left >>>>>>>click of the Window-Eyes Mouse, and the right click keys would be. >>>>>>>This Blue Netbook has two back slashes. One is down by the left >>>>>>>shift key, and that is weird, because I often hit it, when >>>>>>>reaching for the left shift key. The other backslash key is up by >>>>>>>the enter key. >>>>>>>I love the battery life. >>>>>>>There is one weird thing, that is happening, however with Window-Eyes. >>>>>>>I can not use the control-alt down arrow or control-alt left >>>>>>>arrow, and right arrows. It turns the screen upside down. lol. >>>>>>>However, FN key, and Up arrow does raise the volume, and FN key >>>>>>>and the down arrow lowers the volume. >>>>>>>Another strange thing that is happening, is when I open up Windows >>>>>>>Explorer, to copy things from a thumb drive to my hard drive, it >>>>>>>opens several windows of Explorer with my C. drive. That is very >>>>>>>weird. Then, I end up having to close up a bunch of windows. lol. >>>>>>>If anyone has any ideas, I would appreciate knowing them. <smile> >>>>>>>Thanks. >>>>>>>Pat Ferguson >>>>>>> >>>>>>>At 11:07 PM 2/25/2009, you wrote: >>>>>>>>1. fn-key together with the embedded number pad keys are >>>>>>>>disabled. So pressing fn-key together with j k l u i o 7 8 9 does >>>>>>>>not give me the number pad equivelements. This means that I >>>>>>>>cannot use the default keyboard layout and the mouse movement hot >>>>>>>>keys. This means I can't read the current line with >>>>>>>>control-number pad-5 because it would use the embedded number pad. >>>>>>>> >>>>>>>>2. Keys such as comma, period, and slash are too narrow which >>>>>>>>means more typos for my fingers. >>>>>>>> >>>>>>>>3. fn-key and control-key are switched around. On most laptops >>>>>>>>I've used and gotten used to, the control key comes first. Then >>>>>>>>as you ggo to the right, it goes fn-key, windows, alt, and space. >>>>>>>> >>>>>>>>Other than those issues, it is a good machine. If you don't care >>>>>>>>about using the number pad, or you are ok with switching keyboard >>>>>>>>layouts, or you are ok with remapping hot keys to your likes, >>>>>>>>then number 1 is a non-issue. If your fingers are shaped such >>>>>>>>that the comma, period, and slash keys are not pressed wrongly >>>>>>>>quite a bit, then number 2 is a non-issue. Lastly, there is a >>>>>>>>bios hack which allows you to switch the fn-key and the control >>>>>>>>key so they are the "right way". So that too can be a non-issue. >>>>>>>> >>>>>>>>Hope this helps. >>>>>>>> >>>>>>>>Andy Baracco wrote the following on 2/25/2009 11:35 PM: >>>>>>>>>What are the other strikes? >>>>>>>>>At 12:22 PM 2/25/2009, you wrote: >>>>>>>>>>fn-key-f3 will disable the mouse. However you will have to do >>>>>>>>>>this each time you reboot. One of the many strikes I have >>>>>>>>>>against this netbook *smile*. >>>>>>>>>> >>>>>>>>>>John Gallagher wrote the following on 2/24/2009 8:09 AM: >>>>>>>>>>>Hi Jim >>>>>>>>>>>I personally use the mswind u100 which is very good indeed and >>>>>>>>>>>works with window eyes very well. >>>>>>>>>>>the only thing is I am trying to disable the mouse. >>>>>>>>>>>cheers. >>>>>>>>>>>If you reply to this message it will be delivered to the original >>>>>>>>>>>sender only. If your reply would benefit others on the list and >>>>>>>>>>>your message is related to GW Micro, then please consider sending >>>>>>>>>>>your message to [email protected] so the entire list will receive >>>>it. >>>>>>>>>>>All GW-Info messages are archived at >>>>>>>>>>>http://www.gwmicro.com/gwinfo, and can be searched through and >>>>>>>>>>>sorted using the search >>>>>>>>>>>form at the bottom of the page. >>>>>>>>>>>If you wish to unsubscribe from this list, send a message to >>>>>>>>>>>[email protected] and include leave gw-info in the body of >>>>>>>>>>>the message. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>-- >>>>>>>>>>Raul A. Gallegos -- GW Micro Technical Support >>>>>>>>>>Voice: 260-489-3671 -- Fax: 260-489-2608 >>>>>>>>>>WEB: http://www.gwmicro.com >>>>>>>>>> >>>>>>>>>>If you reply to this message it will be delivered to the original >>>>>>>>>>sender only. If your reply would benefit others on the list and >>>>>>>>>>your message is related to GW Micro, then please consider sending >>>>>>>>>>your message to [email protected] so the entire list will receive >>>>it. >>>>>>>>>> >>>>>>>>>>All GW-Info messages are archived at >>>>>>>>>>http://www.gwmicro.com/gwinfo, and can be searched through and >>>>>>>>>>sorted using the search >>>>>>>>>>form at the bottom of the page. >>>>>>>>>>If you wish to unsubscribe from this list, send a message to >>>>>>>>>>[email protected] and include leave gw-info in the body of >>>>>>>>>>the message. >>>>>>>>> >>>>>>>>>If you reply to this message it will be delivered to the original >>>>>>>>>sender only. If your reply would benefit others on the list and >>>>>>>>>your message is related to GW Micro, then please consider sending >>>>>>>>>your message to [email protected] so the entire list will >>>>>>>>>receive it. >>>>>>>>>All GW-Info messages are archived at >>>>>>>>>http://www.gwmicro.com/gwinfo, and can be searched through and >>>>>>>>>sorted using the search >>>>>>>>>form at the bottom of the page. >>>>>>>>>If you wish to unsubscribe from this list, send a message to >>>>>>>>>[email protected] and include leave gw-info in the body of the >>>>message. >>>>>>>> >>>>>>>> >>>>>>>>-- >>>>>>>>Raul A. Gallegos -- GW Micro Technical Support >>>>>>>>Voice: 260-489-3671 -- Fax: 260-489-2608 >>>>>>>>WEB: http://www.gwmicro.com >>>>>>>> >>>>>>>>If you reply to this message it will be delivered to the original >>>>>>>>sender only. If your reply would benefit others on the list and >>>>>>>>your message is related to GW Micro, then please consider sending >>>>>>>>your message to [email protected] so the entire list will receive it. >>>>>>>> >>>>>>>>All GW-Info messages are archived at >>>>>>>>http://www.gwmicro.com/gwinfo, and can be searched through and >>>>>>>>sorted using the search >>>>>>>>form at the bottom of the page. >>>>>>>>If you wish to unsubscribe from this list, send a message to >>>>>>>>[email protected] and include leave gw-info in the body of the >>>>message. >>>>>> >>>>>> >>>>>>-- >>>>>>Raul A. Gallegos -- GW Micro Technical Support >>>>>>Voice: 260-489-3671 -- Fax: 260-489-2608 >>>>>>WEB: http://www.gwmicro.com >>>>>> >>>>>>If you reply to this message it will be delivered to the original >>>>>>sender only. If your reply would benefit others on the list and >>>>>>your message is related to GW Micro, then please consider sending >>>>>>your message to [email protected] so the entire list will receive it. >>>>>> >>>>>>All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, >>>>>>and can be searched through and sorted using the search >>>>>>form at the bottom of the page. >>>>>>If you wish to unsubscribe from this list, send a message to >>>>>>[email protected] and include leave gw-info in the body of >>>>>>the message. >>>>> >>>>>If you reply to this message it will be delivered to the original >>>>>sender only. If your reply would benefit others on the list and >>>>>your message is related to GW Micro, then please consider sending >>>>>your message to [email protected] so the entire list will receive it. >>>>> >>>>>All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, >>>>>and can be searched through and sorted using the search >>>>>form at the bottom of the page. >>>>>If you wish to unsubscribe from this list, send a message to >>>>>[email protected] and include leave gw-info in the body of the message. >>>> >>>> >>>>If you reply to this message it will be delivered to the original >>>>sender only. If your reply would benefit others on the list and >>>>your message is related to GW Micro, then please consider sending >>>>your message to [email protected] so the entire list will receive it. >>>> >>>>All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can >>>>be searched through and sorted using the search >>>>form at the bottom of the page. >>>> >>>>If you wish to unsubscribe from this list, send a message to >>>>[email protected] and include leave gw-info in the body >>>>of the message. >>>> >>>>If you reply to this message it will be delivered to the original >>>>sender only. If your reply would benefit others on the list and >>>>your message is related to GW Micro, then please consider sending >>>>your message to [email protected] so the entire list will receive it. >>>> >>>>All GW-Info messages are archived at >>>>http://www.gwmicro.com/gwinfo, and can be searched through and >>>>sorted using the search >>>>form at the bottom of the page. >>>> >>>>If you wish to unsubscribe from this list, send a message to >>>>[email protected] and include leave gw-info in the body >>>>of the message. >>>> >>>> >>>> >>>>__________ Information from ESET NOD32 Antivirus, version of >>>>virus signature database 3897 (20090228) __________ >>>> >>>>The message was checked by ESET NOD32 Antivirus. >>>> >>>>http://www.eset.com >>>> >>> >>>If you reply to this message it will be delivered to the original >>>sender only. If your reply would benefit others on the list and >>>your message is related to GW Micro, then please consider sending >>>your message to [email protected] so the entire list will receive it. >>> >>>All GW-Info messages are archived at >>>http://www.gwmicro.com/gwinfo, and can be searched through and >>>sorted using the search >>>form at the bottom of the page. >>>If you wish to unsubscribe from this list, send a message to >>>[email protected] and include leave gw-info in the body of the message. >> >>If you reply to this message it will be delivered to the original >>sender only. If your reply would benefit others on the list and >>your message is related to GW Micro, then please consider sending >>your message to [email protected] so the entire list will receive it. >> >>All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, >>and can be searched through and sorted using the search >>form at the bottom of the page. >>If you wish to unsubscribe from this list, send a message to >>[email protected] and include leave gw-info in the body of the message. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search form at the bottom of the page. If you wish to unsubscribe from this list, send a message to [email protected] and include leave gw-info in the body of the message. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the search form at the bottom of the page. If you wish to unsubscribe from this list, send a message to [email protected] and include leave gw-info in the body of the message.
