Hi. I know you reported this before but I'm not clear as to what the
problem is. I just tried recording in the Voice Sense and was able to do
so without problems. Can you give me steps used? Results expected, and
actual reality of what happens?
Many thanks.
dmgina said the following on 8/5/2008 4:23 PM:
I still can't record with my voice sense.
Will this be fixed with the next upgrade?
I was able to do this with the upgrade before this one.
I miss not sending out messages recorded.
--Dar
www.mypowermall.com/biz/home/5779
Every saint has a past
every sinner has a future
----- Original Message ----- From: "Raul A. Gallegos" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, August 05, 2008 5:51 AM
Subject: Re: [GWN] problem with record function on BrailleSense Plus
Hi. I know that at one point the Voice Sense was recording a noice
when recording into the flash disk, however that was fixed in version
1.2. As far as the original Braille Sense goes, you could try to
record into a cf card instead of the flash disk and see if that makes
a difference. The Braille Sense Plus should not have this problem
whatsoever.
Many thanks.
Ming Hui said the following on 8/4/2008 9:38 PM:
Dear Raul,
I don't think it is the problem with the Braille Display, because
when I was
recording, my Braille Display only showed the status. Besides, I
tried on VS before, and the same problem exist. It is a sound
like the ... mechanical sound, Da'da'da'da at one time. But I would
try switching off the display and try again. However, I believe
it is not the Braille display.
Nicole.
-----Original Message-----
From: Raul A. Gallegos [mailto:[EMAIL PROTECTED] Sent: Tuesday,
August 05, 2008 9:30 AM
To: [email protected]
Subject: Re: [GWN] problem with record function on BrailleSense Plus
Hi. What you are hearing is the Braille display updating every
second. Although the dots are quiet, the microphone is so good that
it even picks them up while recording. Note that this phenomenon only
happens if the time of the recording is being displayed. So, you can
either turn off the Braille display with backspace-f3 or you can
focus the main program menu with f1, or you can press f3 to change
focus to a button. The good thing is that like in Windows, you have
many choices of what to do.
Hope this helps.
Chuck and Sharon Campbell said the following on 8/4/2008 9:15 PM:
Hi Raul,
That sounds about right.
What can we do about it?
Living in the Present One day at a time, This is enough. Do not
look back and grieve over the past. For it is gone. And do not be
troubled about the future. For it has not yet come. Live in the
present, and make it so beautiful. That it will be worth remembering.
----- Original Message -----
From: "Raul A. Gallegos" <[EMAIL PROTECTED]
To: [email protected]
Date sent: Mon, 04 Aug 2008 20:53:09 -0400
Subject: Re: [GWN] problem with record function on BrailleSense
Plus
Is the clicking sound happening about once per second?
Chuck and Sharon Campbell said the following on 8/4/2008 8:12 PM:
Hi List,
Has anyone had any trouble with the record function with
internal
mike. I have a clicking sound in mine. If I use an external
mike, the
clicking isn't there. If anyone has had this problem, how have
you
fixed it?
Living in the Present One day at a time, This is enough. Do
not look
back and grieve over the past. For it is gone. And do not be
troubled
about the future. For it has not yet come. Live in the
present, and
make it so beautiful. That it will be worth remembering.
--
Raul A. Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com
--
Raul A. Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com
--
Raul A. Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com
