I didn't say it right.
I can't do a voice message and send it off.
It doesn't work.
It worked fine with the last upgrade but not this one.
Even if the message is short.
Jim can't do a voice message either.
So we will keep waiting.
I love sending voice messages.
Something I thought I wouldn't enjoy.
Learning many things.


----- Original Message -----
From: "Raul A. Gallegos" <[EMAIL PROTECTED]>
To: [email protected]
Date: 2008/08/06 02:28:04
Subject: Re: [GWN] problem with record function on BrailleSense Plus

>
>
> Hi. I know you reported this before but I'm not clear as to what the 
> problem is. I just tried recording in the Voice Sense and was able to do 
> so without problems. Can you give me steps used? Results expected, and 
> actual reality of what happens?
> 
> Many thanks.
> 
> dmgina said the following on 8/5/2008 4:23 PM:
> > I still can't record with my voice sense.
> > Will this be fixed with the next upgrade?
> > I was able to do this with the upgrade before this one.
> > I miss not sending out messages recorded.
> > 
> > 
> > --Dar
> > www.mypowermall.com/biz/home/5779
> > Every saint has a past
> > every sinner has a future
> > 
> > ----- Original Message ----- From: "Raul A. Gallegos" <[EMAIL PROTECTED]>
> > To: <[email protected]>
> > Sent: Tuesday, August 05, 2008 5:51 AM
> > Subject: Re: [GWN] problem with record function on BrailleSense Plus
> > 
> > 
> >> Hi. I know that at one point the Voice Sense was recording a noice 
> >> when recording into the flash disk, however that was fixed in version 
> >> 1.2. As far as the original Braille Sense goes, you could try to 
> >> record into a cf card instead of the flash disk and see if that makes 
> >> a difference. The Braille Sense Plus should not have this problem 
> >> whatsoever.
> >>
> >> Many thanks.
> >>
> >> Ming Hui said the following on 8/4/2008 9:38 PM:
> >>> Dear Raul,
> >>>
> >>> I don't think it is the problem with the Braille Display, because 
> >>> when I was
> >>> recording, my Braille Display only showed the status. Besides, I 
> >>> tried on VS before, and the same problem exist. It is a sound
> >>> like the ... mechanical sound, Da'da'da'da at one time. But I would 
> >>> try switching off the display and try again. However, I believe
> >>> it is not the Braille display.
> >>>
> >>> Nicole.
> >>>
> >>>
> >>>
> >>> ----comOriginal Message-----
> >>> From: Raul A. Gallegos [mailto:[EMAIL PROTECTED] Sent: Tuesday, 
> >>> August 05, 2008 9:30 AM
> >>> To: [email protected]
> >>> Subject: Re: [GWN] problem with record function on BrailleSense Plus
> >>>
> >>> Hi. What you are hearing is the Braille display updating every 
> >>> second. Although the dots are quiet, the microphone is so good that 
> >>> it even picks them up while recording. Note that this phenomenon only 
> >>> happens if the time of the recording is being displayed. So, you can 
> >>> either turn off the Braille display with backspace-f3 or you can 
> >>> focus the main program menu with f1, or you can press f3 to change 
> >>> focus to a button. The good thing is that like in Windows, you have 
> >>> many choices of what to do.
> >>>
> >>> Hope this helps.
> >>>
> >>> Chuck and Sharon Campbell said the following on 8/4/2008 9:15 PM:
> >>>> Hi Raul,
> >>>>  That sounds about right.
> >>>>  What can we do about it?
> >>>>  Living in the Present One day at a time, This is enough.  Do not 
> >>>> look back and grieve over the past.  For it is gone.  And do not be 
> >>>> troubled about the future.  For it has not yet come.  Live in the 
> >>>> present, and make it so beautiful.  That it will be worth remembering.
> >>>>
> >>>>> ----- Original Message -----
> >>>>> From: "Raul A.  Gallegos" <[EMAIL PROTECTED]
> >>>>> To: [email protected]
> >>>>> Date sent: Mon, 04 Aug 2008 20:53:09 com0400
> >>>>> Subject: Re: [GWN] problem with record function on BrailleSense
> >>>> Plus
> >>>>
> >>>>> Is the clicking sound happening about once per second?
> >>>>> Chuck and Sharon Campbell said the following on 8/4/2008 8:12 PM:
> >>>>>> Hi List,
> >>>>>>  Has anyone had any trouble with the record function with
> >>>> internal
> >>>>>> mike.  I have a clicking sound in mine.  If I use an external
> >>>> mike, the
> >>>>>> clicking isn't there.  If anyone has had this problem, how have
> >>>> you
> >>>>>> fixed it?
> >>>>>>  Living in the Present One day at a time, This is enough.  Do
> >>>> not look
> >>>>>> back and grieve over the past.  For it is gone.  And do not be
> >>>> troubled
> >>>>>> about the future.  For it has not yet come.  Live in the
> >>>> present, and
> >>>>>> make it so beautiful.  That it will be worth remembering.
> >>>>
> >>>>> -- 
> >>>>> Raul A.  Gallegos -- GW Micro Technical Support
> >>>>> Voice: 260-489-3671 -- Fax: 260-489-2608
> >>>>> WEB: http://www.gwmicro.com
> >>>
> >>>
> >>
> >>
> >> -- 
> >> Raul A. Gallegos -- GW Micro Technical Support
> >> Voice: 260-489-3671 -- Fax: 260-489-2608
> >> WEB: http://www.gwmicro.com
> >>
> >>
> 
> 
> -- 
> Raul A. Gallegos -- GW Micro Technical Support
> Voice: 260-489-3671 -- Fax: 260-489-2608
> WEB: http://www.gwmicro.com
> 

,dar
www.mypowermall.com/mall/biz/5779
every saint has a past
every sinner has a future
www.mypowermall.com/biz/home/5779
every saint has a past
every sinner has a future
Dar
 

Reply via email to