Hi. Can you try to record to a memory card instead of the flash disk?
Chuck and Sharon Campbell said the following on 8/5/2008 11:28 AM:
Hi Raul,
I can tell you that Chuck also tried recording with the braille display
turned off as you directed, it didn't make a difference.
Living in the Present One day at a time, This is enough. Do not look
back and grieve over the past. For it is gone. And do not be troubled
about the future. For it has not yet come. Live in the present, and
make it so beautiful. That it will be worth remembering.
----- Original Message -----
From: "Raul A. Gallegos" <[EMAIL PROTECTED]
To: [email protected]
Date sent: Tue, 05 Aug 2008 07:51:05 -0400
Subject: Re: [GWN] problem with record function on BrailleSense
Plus
Hi. I know that at one point the Voice Sense was recording a
noice when
recording into the flash disk, however that was fixed in version
1.2. As
far as the original Braille Sense goes, you could try to record
into a
cf card instead of the flash disk and see if that makes a
difference.
The Braille Sense Plus should not have this problem whatsoever.
Many thanks.
Ming Hui said the following on 8/4/2008 9:38 PM:
Dear Raul,
I don't think it is the problem with the Braille Display,
because when I was
recording, my Braille Display only showed the status.
Besides, I tried on VS before, and the same problem exist. It
is a sound
like the ... mechanical sound, Da'da'da'da at one time.
But I would try switching off the display and try again.
However, I believe
it is not the Braille display.
Nicole.
-----Original Message-----
From: Raul A. Gallegos [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 05, 2008 9:30 AM
To: [email protected]
Subject: Re: [GWN] problem with record function on BrailleSense
Plus
Hi. What you are hearing is the Braille display updating every
second.
Although the dots are quiet, the microphone is so good that it
even
picks them up while recording. Note that this phenomenon only
happens if
the time of the recording is being displayed. So, you can
either turn
off the Braille display with backspace-f3 or you can focus the
main
program menu with f1, or you can press f3 to change focus to a
button.
The good thing is that like in Windows, you have many choices of
what to do.
Hope this helps.
Chuck and Sharon Campbell said the following on 8/4/2008 9:15
PM:
Hi Raul,
That sounds about right.
What can we do about it?
Living in the Present One day at a time, This is enough. Do
not look
back and grieve over the past. For it is gone. And do not be
troubled
about the future. For it has not yet come. Live in the
present, and
make it so beautiful. That it will be worth remembering.
----- Original Message -----
From: "Raul A. Gallegos" <[EMAIL PROTECTED]
To: [email protected]
Date sent: Mon, 04 Aug 2008 20:53:09 -0400
Subject: Re: [GWN] problem with record function on BrailleSense
Plus
Is the clicking sound happening about once per second?
Chuck and Sharon Campbell said the following on 8/4/2008 8:12
PM:
Hi List,
Has anyone had any trouble with the record function with
internal
mike. I have a clicking sound in mine. If I use an external
mike, the
clicking isn't there. If anyone has had this problem, how have
you
fixed it?
Living in the Present One day at a time, This is enough. Do
not look
back and grieve over the past. For it is gone. And do not be
troubled
about the future. For it has not yet come. Live in the
present, and
make it so beautiful. That it will be worth remembering.
--
Raul A. Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com
--
Raul A. Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com
--
Raul A. Gallegos -- GW Micro Technical Support
Voice: 260-489-3671 -- Fax: 260-489-2608
WEB: http://www.gwmicro.com
