Hi Peter, After you press enter c to copy the file, press the backspace key to back out of the list of files and folders. Repeat the backspace until you get to the list of disks. Arrow to the compact flash card and press enter. If desired, arrow to the desired folder and press enter. Now press enter v to paste the file. HTH Cliff
-----Original Message----- From: peter greco [mailto:[email protected]] Sent: Saturday, October 03, 2009 11:20 AM To: [email protected] Subject: Re: [GWN] sending file from an s d card to a c f card using the VS Hi Tessa. Thanks for your advice. My VS has recognised the c f card. However, say I have an ASCII file on my c f card and I want to copy it to an s d card, I only get offerred the s c card as a place to save it, is it possible to select a folder on the s d card on to which I want it saved? If so, how? Best! Peter. > ----- Original Message ----- >From: "Tessa" <[email protected] >To: <[email protected] >Date sent: Thu, 1 Oct 2009 09:57:12 -0400 >Subject: Re: [GWN] sending file from an s d card to a c f card using the VS >When my bs+ didn't show my CF card I fixed it by pulling out the card while >the machine was on then putting it back in, the machine should say storage >device inserted and it should show the CF card then, might have to do it a >couple times. I'd assume you'd just use copy to send the file as you would >if you wanted to copy it anywhere else on the machine, or cut if you want to >remove it from one card and carry it to the other. >Tessa >----- Original Message ----- >From: "peter greco" <[email protected] >To: <[email protected]>; <[email protected] >Sent: Thursday, October 01, 2009 8:45 PM >Subject: [GWN] sending file from an s d card to a c f card using the VS >I'm wanting to send a text file from an s d card to a c f card >using a VS running 1,3. >The VS doesn't seem to offer me the CF card! Just the flash disk. >How do I get it to offer me the c f card? >How do I choose whereabouts on the c f card I want to send the >file? >Peter.
