Also, if you completely close out of the File Manager by mistake, your file will not paste.
-----Original Message----- From: Raul A. Gallegos [mailto:[email protected]] Sent: Monday, October 12, 2009 2:56 PM To: [email protected] Subject: Re: [GWN] sending file from an s d card to a c f card using the VS Hello. One thing to keep in mind is to never press the f1 key after pressing the copy enter-c command. If you press f1 to reach the program list and enter on the file manager to reach your new location, the copy will not work. Many thanks. On 10/3/2009 7:21 AM, Cliff Fry wrote: > Hi Peter, > After you press enter c to copy the file, press the backspace key to back > out of the list of files and folders. Repeat the backspace until you get to > the list of disks. Arrow to the compact flash card and press enter. If > desired, arrow to the desired folder and press enter. Now press enter v to > paste the file. HTH > Cliff > > > -----Original Message----- > From: peter greco [mailto:[email protected]] > Sent: Saturday, October 03, 2009 11:20 AM > To: [email protected] > Subject: Re: [GWN] sending file from an s d card to a c f card using the VS > > Hi Tessa. > Thanks for your advice. > My VS has recognised the c f card. > However, say I have an ASCII file on my c f card and I want to > copy it to an s d card, I only get offerred the s c card as a > place to save it, is it possible to select a folder on the s d > card on to which I want it saved? > If so, how? > Best! > Peter. > >> ----- Original Message ----- >> From: "Tessa"<[email protected] >> To:<[email protected] >> Date sent: Thu, 1 Oct 2009 09:57:12 -0400 >> Subject: Re: [GWN] sending file from an s d card to a c f card > using the VS > >> When my bs+ didn't show my CF card I fixed it by pulling out the > card while >> the machine was on then putting it back in, the machine should > say storage >> device inserted and it should show the CF card then, might have > to do it a >> couple times. I'd assume you'd just use copy to send the file as > you would >> if you wanted to copy it anywhere else on the machine, or cut if > you want to >> remove it from one card and carry it to the other. >> Tessa > >> ----- Original Message ----- >> From: "peter greco"<[email protected] >> To:<[email protected]>;<[email protected] >> Sent: Thursday, October 01, 2009 8:45 PM >> Subject: [GWN] sending file from an s d card to a c f card using > the VS > > >> I'm wanting to send a text file from an s d card to a c f card >> using a VS running 1,3. >> The VS doesn't seem to offer me the CF card! Just the flash disk. >> How do I get it to offer me the c f card? >> How do I choose whereabouts on the c f card I want to send the >> file? >> Peter. > > -- Raul A. Gallegos GW Micro Technical Support Team Voice 260-489-3671, Fax 260-489-2608 Web http://www.gwmicro.com No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.421 / Virus Database: 270.14.12/2431 - Release Date: 10/12/09 13:01:00
