Hello listers and Raul, I tried to use another USB keyboard with my Braille Sense Plus without success. Now what When typing on the USB keyboard while it is connected to the BSP, (and I tend to type quite quickly), dialogue boxes on the BSP open. For example, typing the letter "o" and a space on the USB keyboard or typing a space and then an "o" would open the options menu. Why is this the case? Do I just need to type slowly on the USB keyboard while it is connected to the BSP? Thank you, Nafisah.
--- Original Message ----- From: "Raul A. Gallegos" <[email protected]> To: <[email protected]> Sent: Thursday, October 22, 2009 9:35 AM Subject: Re: [GWN] a question for Raul about USB keyboard and Braille Sense > Hello. the first issue you report is normal since parts of the Braille > Sense case are against a hollow part of the internal components. > Regarding the usb keyboard, this is not normal. if you try another > keyboard do you experience the same behavior? > > Many thanks. > > On 10/21/2009 10:43 PM, N. A. wrote: > > Hello all, > > These questions are for Raul. > > Raul, I sent a message to support regarding a USB keyboard and the > > Braille Sense Plus B32 as well as a question about the back panel of the > > Braille Sense Plus. Unfortunately I didn't get a response and I'm > > anxious to use a USB keyboard with my BSP. I'll include this message > > below. Could you please look into this? Thank you, > > Nafisah. > > First, the back panel of my Braille Sense Plus B32 seems to be loose. > > When I push on the side of it closest to the braille display (that is, > > the longest side of the unit which would be facing you if you are typing > > on it), I can hear it squeaking. > > Is this normal? By the back panel, I am referring to the panel on which > > is the brailled label of the unit's serial number. > > Second, I tried to use a Microsoft Comfort Curve USB keyboard with my > > Braille Sense Plus B32. The unit went into ASCII mode and I pushed keys > > on the USB > > keyboard. However, the BSP was very slow to print on its braille display > > the letter I typed on the USB keyboard. For example, I would type the > > letter "a" > > and a space. I'd have to wait about two seconds before pressing the > > spacebar on the USB keyboard for the space to register on the BSP's > > braille display. > > . And before that, the "a" would appear after about two seconds. Can you > > please explain why this is the case? Should I be using another USB > > keyboard or > > is this normal behaviour? Or is there a setting in the BSP that I need > > to change? > > > > > > If you wish to unsubscribe from this list, send a message to [email protected] and include leave gw-notetaker in the body of the message. > > > -- > Raul A. Gallegos > GW Micro Technical Support Team > Voice 260-489-3671, Fax 260-489-2608 > Web http://www.gwmicro.com > > If you wish to unsubscribe from this list, send a message to [email protected] and include leave gw-notetaker in the body of the message. > If you wish to unsubscribe from this list, send a message to [email protected] and include leave gw-notetaker in the body of the message.
