Plug into the 1st normal network port. Took a while for me to get the hang of setting mine up. You'll have down download the software from ubiquiti to initially configure the unit. You can't connect directly to it until you've run the wizard
lopaka On Tue, Jun 26, 2018 at 10:34 PM, Winterlight <[email protected]> wrote: > I have an old Trendnet router that hasn't had a firmware update since 2014 > so I figured it was time to update. Because I use a Ubiquiti AirMax > wireless I bought a Ubiquiti EdgeMax SFP router with PoE support on sale > at Newegg. It has a SFP Port. I bought it quite a while ago in anticipation > of using it so there is no sending it back... here is the manual > http://www.rode.us/EdgeRouter_X_DS.pdf > > It wasn't very expensive but it has a level of sophistication that is > beyond me. I understand that I can use my AirMax without a power connection > by running it off one of the PoE ports. And I could also use my Panasonic > Security Cameras in the same way... But where do I plug in the cable modem? > The SFP port.. but isn't that fiber. Did I buy the wrong kind of router for > the job. Help! > >
