Forc5,
Don't really understand the voltage difference. I don't OC any longer. I
let the m/b set RAM voltage as it sees fit. One less technical issue to
chase when odd stuff happens.
Best,
Duncan
On 01/01/2011 20:45, FORC5 wrote:
I too used to like Mushkin :'(
The ballistix need to run at 2v when pushed. Usually work fine @ 1.8. depends
on bus speed I think. 1.8 ok at 400 but 2 needed beyond that.
just a guess
fp
At 04:39 PM 1/1/2011, DSinc Poked the stick with:
fORC5,
I share your skepticism. I own 3 of those Ballistix 2GB kits. I have seen issues with 2
of them. Nothing serious yet, just periods of odd behavior. I have already rma'd one 1GB
stick (2010). I will continue to support Crucial for now, but I will NOT buy any more RAM
in the "Ballistix" series/brand.
Sadly, I have also given up on Mushkin product also! Way too many conflicting
choices.
Best,
Duncan
On 01/01/2011 16:23, FORC5 wrote:
Happy New Year to all !
Been using crucial memory almost exclusively for many years, had a system come
back in would not post. Testing memory one at a time, posts with one and not
the other. FWIW tested in more then one MB.
RMA initiated, 1st for me and Crucial. FWIW DDR2 800 Ballistix 2 x 1gb kit.
Voltage properly set, Balliztix specs 2V even though runs fine in my main box
at 1.8.
Hope this is not a sign. I also use Corsair on occasion but was wondering about
the groups track record with memory ?
fp
__________ Information from ESET Smart Security, version of virus signature
database 5752 (20110101) __________
The message was checked by ESET Smart Security.
http://www.eset.com
