Hi, Dieter Spaar <[email protected]> writes: > Sorry, no, there seems to be something wrong. PCO2 is not needed to
To be able to use USB I need to use the supplied 8 MHz oscillator of the AVR board. According to atmel tables this does means that if I configure USART for 115200 the baud rate error is -3,5 % (too slow). This probably explains why I only got garbage data. I started to capture the data by simply polling the input pin in a tight loop (bit banging) and managed to decode \x02\x12ADC:169470\n\r\x02\x02\x12gauging16947\n\r\x02\x02\x11\x00\n\x00\x10\x10\x05IQEXT:ADCEnd\x02 Any idea what those \x02's, \x11's and \x00's are for? Just decoding errors? The raw data is at http://iki.fi/lindi/openmoko/calypso-logger/bitbang3.out and http://iki.fi/lindi/openmoko/calypso-logger/decode-serial is a quick'n'dirty decoder. best regards, Timo Lindfors _______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
