> Also if anyone observing #1024 wants to help and make some > traces, please let us know. Tracing is not that complicated, > all what is needed is a cable to connect the optional debug > UART from the headset to a terminal and record the data. > For a start, the default data are good enough. We do have > some USB cables (Thanks to Werner who took care) so if you > are willing to make the traces and need a cable and are > best of all located in Europe to make sending the cable > easier, feel free to contact me.
Anyone with a debug board can make a simple cable to connect it to the headset port: Debug board J10 <-> 2.5mm 3-pole jack plug 1 (TXD) <-> Tip (RX_IRDA) 2 (RXD) <-> Ring (TX_IRDA) 9 (GND) <-> Sleeve (Gnd) modprobe ftdi_sio vendor=0x1457 product=0x5118 The port will appear as /dev/ttyUSB1 if you don't have any other USB serial devices. _______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
