Hello Al, Al Johnson wrote: > Anyone with a debug board can make a simple cable to connect it to the > headset > port: > > Debug board J10 <-> 2.5mm 3-pole jack plug > 1 (TXD) <-> Tip (RX_IRDA) > 2 (RXD) <-> Ring (TX_IRDA) > 9 (GND) <-> Sleeve (Gnd) > > modprobe ftdi_sio vendor=0x1457 product=0x5118 > > The port will appear as /dev/ttyUSB1 if you don't have any other USB serial > devices. >
Thank you very much for posting this information, I really appreciate it. Best regards, Dieter _______________________________________________ hardware mailing list [email protected] http://lists.openmoko.org/mailman/listinfo/hardware
