the hdmi2usb will only send data at usb2 speed, so saving isn't going to matter.
pulling the data off later is a different issue. You haven't said much about that, so for now I'll just suggest: unplug the usb drive, plug it into the destination, done. https://minnowboard.org/minnowboard-max $140 USD - has gig-E usb3 and SSD slot. On Sun, Jul 16, 2017 at 2:36 AM, Sjd Aliyan <sjd.ali...@gmail.com> wrote: > But problem is i want to capture into a sata ssd.most of cobs doesn't > have sata and if they have their speed is very low.so i must use something > like nvidia jetson or going after fpga. > > > > On Saturday, July 15, 2017 at 7:25:39 PM UTC+3:30, Sjd Aliyan wrote: >> >> I want to design a hdmi recorder.to capture from hdmi source to ssd >> I have some options available what do you think? >> 1-Design a hdmi to csi bridge and use it with Raspberry or some other cob. >> 2-Design video processing part based on low cost fpga and use a android >> cob for human interface. >> 3-Design everything based on fpga >> What do you suggest? >> > -- > You received this message because you are subscribed to the Google Groups > "hdmi2usb - A HDMI capture solution" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hdmi2usb+unsubscr...@googlegroups.com. > -- Carl K -- You received this message because you are subscribed to the Google Groups "hdmi2usb - A HDMI capture solution" group. To unsubscribe from this group and stop receiving emails from it, send an email to hdmi2usb+unsubscr...@googlegroups.com.