Hi Sébastien,
Sébastien Gendre <[email protected]> writes: > Hello, > > I have installed Guix System on a computer, using the install image. > But the computer don't boot on the disk where I installed Guix System. > > No error message displayed, the computer always come back to the EFI disk > selection menu. > > During the installation, I get no error for the installation of Grub. > > For the install image, I have built it like described in the manual. > Section "3.9 Building the Installation Image". Built from a computer > with Guix version b84618b. Then, I have written the ISO file to an USB > stick. > > I can boot on the USB stick. I have successfully used it's Grub to > chainload the grub from my Guix System installation. After booting, I > have done a `guix system reconfigure`. But it change nothing. > > The computer was previously working with Fedora and have no boot > problem. > > I have tested to disable Secure Boot, but it didn't fix my problem. The > computer EFI menu have no option to fallback to bios boot. > > For installing the system, I have chosen the guided graphical > installation and selected: > - Gnome desktop > - 2 partitions: Boot and root > - Root is encrypted > - I also have enabled CUPS > - No other system, the SSD was empty before the installation > > > I am out of option. Last time I have problem with boot, it was mostly 20 > years ago and with the BIOS. Even after some search on the Web, I still > have found no solution. > > Do you have any idea ? Could you send your config? It's very hard to say without it. Rutherther
