BM 2012 weather was pretty mild, but we did have some 90"F weather, one dust storm and a bit of rain...
Also my design features horizontal bands of tensioned 2" straps which really solidifies the structure to a point where I can single-handedly lift it up by the door :) 2" foam does very nicely under compression... Cheers, Vladimir On Thu, Mar 28, 2013 at 6:40 PM, Jacob Rodriguez <[email protected]>wrote: > Ohh, cordura and contact cement. Perfect example of using adhesives and > fabric as a reasonable means of joining the 'angles vs traditional filament > tape. > > My grandfather also recommended contact cement, as it's waterproof. Using > a brush applicator would also make application a little more accurate. > > Have you tested this combination in an outdoor (windy and/or wet) > environment? > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/hexayurt?hl=en. > For more options, visit https://groups.google.com/groups/opt_out. > > > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/hexayurt?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
