Steve - just a rechargeable drill? Not an impact driver? Wondering whether my 12V drill would do it - or maybe a combination of that and a ratchet.
On 14 July 2017 at 12:08, Steve Upstill <upst...@gmail.com> wrote: > Lag bolts! Lag bolts! Lag bolts! Last year I drove and removed 50+ lag > bolts with my 18V rechargeable drill, along with many other demands on the > drill, without even going to my spare battery. > > Cost: about $1.20 each, plus about $.15 for chain. Effort/annoyance saved: > priceless. Every person who has seen lag bolts being installed/removed, if > they've ever touched rebar, has had an enlightenment experience. > > I'm never going back to rebar. > > On Fri, Jul 14, 2017 at 11:38 AM Oz <ozpo...@gmail.com> wrote: > >> I just use 2 5 foot lengths of gas pipe with coupling fittings threaded >> to the ends to minimize damage to the pipe. The first bend starts with the >> pipes flush, then I move them about an inch apart to complete the nearly >> perfect U bend. When the rebar is driven, the two legs give you immediate >> stability, the legs spread for more gripping power, and the rebar is flush >> to the playa for no tripping/ripping damage to altered hippies. A little >> digging with a claw hammer and a few lateral pounds and the rebar comes >> right up. >> >> I've been using this system for 15+ burns with no issues. Some years you >> do have to move the loose playa out of the way to get to the hard pack. I >> know this isn't as sexy as lag bolts, but it's cheap and has no power >> requirements. >> >> On Fri, Jul 14, 2017 at 11:09 AM, ken winston caine < >> ken.winston.ca...@gmail.com> wrote: >> >>> Was really impressed with this suggestion back in 2010. Commented as >>> much then, so I must have understood what KrazyKorny meant. But today I am >>> staring at a bunch of 2' long pieces of 3/8" rebar wondering how I am going >>> to use a bumper jack to bend them to form hooks on one end? >>> >>> Can anyone explain? >>> >>> Or is there an even better way to make the bends? >>> >>> Thanks. >>> >>> >>> >>> >>> On Saturday, July 31, 2010 at 2:12:06 PM UTC-6, KrazyKyngeKorny wrote: >>>> >>>> Two lengths of pipe will facilitate bending the bar. >>>> >>>> A bumper jack will make it easy to pull the "U"s. >>>> >>>> KrazyKorny (Krazy, not stupid) >>>> >>>> On Sat, Jul 31, 2010 at 12:06 PM, ken winston caine < >>>> k...@mindbodyspiritjournal.com> wrote: >>>> >>>>> Two things: >>>>> >>>>> >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "hexayurt" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to hexayurt+unsubscr...@googlegroups.com. >>> To post to this group, send email to hexayurt@googlegroups.com. >>> Visit this group at https://groups.google.com/group/hexayurt. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "hexayurt" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to hexayurt+unsubscr...@googlegroups.com. >> To post to this group, send email to hexayurt@googlegroups.com. >> Visit this group at https://groups.google.com/group/hexayurt. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hexayurt+unsubscr...@googlegroups.com. > To post to this group, send email to hexayurt@googlegroups.com. > Visit this group at https://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to hexayurt+unsubscr...@googlegroups.com. To post to this group, send email to hexayurt@googlegroups.com. Visit this group at https://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.