I had the same setup. One nic out side my firewall and one on my internal LAN I tried the -ip x.x.x.x command on startup of the HL server and could not force it to use the external nic. I reverted back to only using one nic through my firewall.
----- Original Message ----- From: Mike <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 03, 2001 9:36 AM Subject: RE: Set the IP the Server should use > > For me the internet connection device is the key. I use a linksyss > router/gateway. I have to forward the port (ie: 27005 - 27030) to the > computers ip behind the router. When I look at the ips on the net I see > both the ip for the computer and the router, but that's because I am behind > the router, everyone else sees only the router ip. > > Mike > > -----Original Message----- > From: pakmann [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, October 03, 2001 1:17 AM > To: [EMAIL PROTECTED] > Subject: Set the IP the Server should use > > > Hi, > > I have a problem setting up my server. I have a LAN and an Internet > Connection on my machine. Everytime I start the Server it takes the IP of > the LAN Device and send it to the Master Servers. So Nobody can connect to > my Server if he dont know the correct ip. > > Is there any way to tell the Server which IP it should sed to the master > servers? > > thx > Pakmann > > > >
