--
[ Picked text/plain from multipart/alternative ]
dmesg:
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fb930
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @
0x000fa980
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @
0x3fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @
0x3fff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @
0x3fff00c0
ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @
0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000
I/O APIC #2 Version 3 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 apm=on
apm=power-off
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2107.203 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 1033396k/1048512k available (2120k kernel code, 14184k
reserved, 920k data, 160k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor
mode... Ok.
Calibrating delay loop... 4153.34 BogoMIPS
Security Scaffold v1.0.0 initialized
Capability LSM initialized
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000
00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000
00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
CPU0: AMD Athlon(tm) XP 2800+ stepping 00
per-CPU timeslice cutoff: 1462.41 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
Total of 1 processors activated (4153.34 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-17, 2-19, 2-20, 2-21, 2-22,
2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 0EF 0F 1 0 0 0 0 0 2 23
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 0F7 07 1 0 0 0 0 1 2 07
0c 001 01 0 0 0 0 0 1 1 79
0d 001 01 0 0 0 0 0 1 1 81
0e 001 01 0 0 0 0 0 1 1 89
0f 001 01 0 0 0 0 0 1 1 91
10 001 01 1 1 0 1 0 1 1 99
11 000 00 1 0 0 0 0 0 0 00
12 001 01 1 1 0 1 0 1 1 A1
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ18 -> 0:18
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2106.0179 MHz.
..... host bus clock speed is 336.0988 MHz.
Starting migration thread for cpu 0
CPUS done 8
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3177] at 0000:00:11.0
PCI->APIC IRQ transform: (B0,I5,P0) -> 16
PCI->APIC IRQ transform: (B0,I7,P0) -> 18
Machine check exception polling timer started.
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
NTFS driver 2.1.6 [Flags: R/O].
Initializing Cryptographic API
pty: 256 Unix98 ptys configured
Using anticipatory io scheduler
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
hda: MAXTOR 6L080L4, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63,
UDMA(133)
hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 160k freed
Adding 709624k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
Real Time Clock Driver v1.12
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 304 bytes per
conntrack
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xec00, 00:02:44:98:04:32, IRQ 18
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
lp: driver loaded but no devices found
request_module: failed /sbin/modprobe -- char-major-4-64. error = 256
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
disabled
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Quoting Jan Marquardt : Is there anything eye-catching in dmesg?
Regards,
Jan
Ian mu schrieb:
--
[ Picked text/plain from multipart/alternative ]
Other one worth a double check is dma on the hard drive, can check
with
hdparm /dev/hdx (if its ide, guessing it maybe is from spec) and
check its
set to 1. Have seen a few boxes that have a few errors and it turns
off.
On 11/15/06, Whisper wrote:
--
[ Picked text/plain from multipart/alternative ]
Good call Gary
Both the Switch and the NIC need to have duplex set to Auto or both
forced
to duplex. It is a myth that you can set the switch the Duplex and
the NIC
set to auto will pick up on the connection being full duplex.
Speed is the same, but can result in no link at all, depending upon
the
setup
On 11/16/06, Gary wrote:
Sounds like ethernet collisions (bad duplex)
At 06:38 AM 11/15/2006, Andrius Pirus wrote:
--
[ Picked text/plain from multipart/alternative ]
I have problem- My counter-strike 1.6 server is having problems with
losses. I watch my server status (in cs 1.6 console) and every
10-20
seconds it shows losses for almost all players (about 1-3). I have
never had problem like this before. Could it be because of bad
hard-drive or something like that? I tried disabling metamod and
amxmodx, changing sv_maxrate, sv_maxupdaterate, many different
engines (3144,2738,3421 etc.) but it didn't solve this problem. My
ISP is very good and doesn't have any problems with internet
connection. CPU and memory usage is normal, the same for ping of
players. Only these losses and sometimes lags.. Server is AMD Athlon
2500+, 1 GB RAM, 80 GB HDD (maybe because of HDD?)I tried also
changing maxplayers, disabling vac etc.. I was watching also cpu
usage (with "top"). What could cause this? p.s. sorry for bad
English.
Izvrashenj
--
_______________________________________________
To unsubscribe, edit your list preferences, or view the list
archives, please visit:
http://list.valvesoftware.com/mailman/listinfo/hlds_linux
_______________________________________________
To unsubscribe, edit your list preferences, or view the list
archives,
please visit:
http://list.valvesoftware.com/mailman/listinfo/hlds_linux
--
_______________________________________________
To unsubscribe, edit your list preferences, or view the list
archives,
please visit:
http://list.valvesoftware.com/mailman/listinfo/hlds_linux
--
_______________________________________________
To unsubscribe, edit your list preferences, or view the list
archives, please visit:
http://list.valvesoftware.com/mailman/listinfo/hlds_linux
_______________________________________________
To unsubscribe, edit your list preferences, or view the list
archives, please visit:
http://list.valvesoftware.com/mailman/listinfo/hlds_linux
Links:
------
[1] mailto:[EMAIL PROTECTED]
--
_______________________________________________
To unsubscribe, edit your list preferences, or view the list archives, please
visit:
http://list.valvesoftware.com/mailman/listinfo/hlds_linux
