Hello Lou, HPR is not heavy weight coated. You should have used photo matte instead.
--nick --- In [email protected], "swagman002" <[EMAIL PROTECTED]> wrote: > > Hello, > > I have just tried my first test print using Hahnemuhle Photo Rag 188 > that has resulted in a print where the colours are way over saturated. > The approach that I took was to:- > > 1. Download HP's supplied profile for this paper > 2. Calibrate the DJ130 to this paper, using "Heavy Weight Coated" > at "Best" > 3. Set the print preference to use the Hahnemuhle Photo Rag 188 ICC > 4. Printer setup to use "Heavy Weight Coated Paper" at "Best", with > color management set to "Application Managed Color" > > Softproofing shows the image to be acceptable, but when printed the > image colour is over saturated. Maybe the ink load is too heavy?? Any > assistance/advice would be most gratefull. > > Thanks > Lou > Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
