Hello, I have just tried my first test print using Hahnemuhle Photo Rag 188 that has resulted in a print where the colours are way over saturated. The approach that I took was to:-
1. Download HP's supplied profile for this paper 2. Calibrate the DJ130 to this paper, using "Heavy Weight Coated" at "Best" 3. Set the print preference to use the Hahnemuhle Photo Rag 188 ICC 4. Printer setup to use "Heavy Weight Coated Paper" at "Best", with color management set to "Application Managed Color" Softproofing shows the image to be acceptable, but when printed the image colour is over saturated. Maybe the ink load is too heavy?? Any assistance/advice would be most gratefull. Thanks Lou Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
