If this is any help, I nolonger use Photoshop to run my prints, but instead use Qimage. I have been using Qimage for about a year now with no problems at all.
Regards Lou ----- Original Message ----- From: Michael Keller To: [email protected] Sent: Friday, March 09, 2007 2:59 PM Subject: RE: [HPDesignJet_Printers] incomplete printing dj130 I have this problem occasionally on a PC with the printer connected via USB, sometimes it's a large print, sometimes a small one. It stops with the print stuck in the printer and the only way to get it out is to reboot the printer (unplug from wall). The only connection I've seen is when I queue up a number of prints, one finally stops and kills the entire queue. But I don;t have the problem nearly as often as you do. I'd like to know the answer to this myself. Win XP Pro, P4/2.6GHz, 2GB RAM > -----Original Message----- > > Printing 24" x 24 " (60cm x60xm) prints 300dpi, printing suddenly > stops, the print que > drops, usually about 1/3 of the way through the file. Files are > usually around 250MB, but the > problem has happened on small files. > Max OSX 10.4.8, MacPro Dual-Core Intel Xeon. 5GB ram. > Printer connected via USB. Have tried 4 different cables and of > different length. > If printing is incomplete, restarting photoshop or the computer > usually solves the problem > for one, mayber 2 prints. > Then incomplete printing starts again. > I have searched hp's site, without luck. > >
