--- In [email protected], "Shannon Mortensen" <[EMAIL PROTECTED]> wrote: > > Anyone have thoughts on why I keep getting a printhead path error on > our 5500? There is nothing in the way, the assembly moves just fine... > it ran a complete calibration after I installed a new printhead, with > no problems... then the first job I tried to run it got about 1/4 of > the way through before giving me the error. I unload the media, reload > it... go through the entire startup process again, only to have the > same dang thing happen! I'm getting very frustrated... anyone know > what might be causing this??? > > Thanks.... > Shannon >
Not sure if this will be helpful or not, but have you tried oiling the slider rods? And, have you checked the carriage belt to see if it's in good shape? And sometimes, just for fun, cleaning the encoder strip makes the world a better place. Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
