--- In [email protected], "Keith Douglas" <[EMAIL PROTECTED]> wrote: > > Has anyone been able to get rid of the marks? Really bad on the HP gloss > paper > I suspect these marks are an intrinsic design problem with 130s. There is too much tension in the roll path or something?
Almost all stock printed from roll shows pressure marks, however slight, and with HP Premium Plus Photo & Proofing Gloss, these show up really bad. Our solution is to sheet roll stock before printing, and run it through the front manual print slot, which on 130s is now the only slot we use. Hope this helps. Regards, Perry Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
