I can remember getting things flowing on my Epson by using the original Windex 10-20% with water solution. It worked. All I have done with the 130 was using a Qtip to remove any debree on the head, as it gave me a Yellow head error. It worked for a bit then it gave the same error and I swapped it with success so far. Maybe a bit of alcohol on the Qtip might also help?
I would take what I said only if you want to gamble, as I have done this with what I have read on the internet. Good luck! Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
