OK I'm stumped. I am not able to avoid a "Reseat Pen" error on my Designjet 650C Plotter. Originally this error constantly occurred in the YELLOW pen slot regardless which color pen was inserted there. Suspecting a printed circuit problem, I removed the Pen Carriage Assembly and carefully examined all the circuits emanating from the yellow pen slot. I found no problems so I concluded that I needed to replace the Pen Carriage Assembly. I then installed a reconditioned Assembly purchased from sonicsounds and find that I continue to have a "Reseat Pen" error but now it occurs in the CYAN pen slot. I am perplexed that this problem is not solved. It seems that both assemblies are not working but before returning the newer assembly want to check with the group. Questions: Has anyone else had this type of problem? Should I try a third assembly or is the problem "upstream" from where I am looking? Should I look elsewhere for the problem? What am I overlooking?
Thanks for listening. - Bob - Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
