It could be some air in the line, but we have 4 of these printers and the main problem we have is with printheads. If they malfunction before they are at 100% HP will replace them, but usually you have to sit on the phone with them for an hour.
Marcia From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of ggkelly1946 Sent: Thursday, January 03, 2008 8:29 AM To: [email protected] Subject: [HPDesignJet_Printers] 90R problem I have been getting some orange prints. HP tech thought that it might be the printheads after doing a printhead alignment it showed that the cyan was not doing what it should (banding and missing lines in the cyan areas). After doing an alignment check the next morning all was well but after printing an 8x10 and starting another, about halfway through it started the orange thing again. I had heard that it might be air in the line but I have been unable to find any information on what to do. Any help would be appreciated. I have just recently changed out the cyan tank.
<<image001.jpg>>
<<image002.jpg>>
