I had exactly that problem with green showing up, rather than your orange. The problem was intermittent. In my case, installing a new Magenta print head solved the problem. If you have not already done it, you might try a new cyan print head.
Doug On Jan 3, 2008, at 6:28 AM, ggkelly1946 wrote: > I have been getting some orange prints. HP tech thought that it might > be the printheads after doing a printhead alignment it showed that the > cyan was not doing what it should (banding and missing lines in the > cyan areas). After doing an alignment check the next morning all was > well but after printing an 8x10 and starting another, about halfway > through it started the orange thing again. I had heard that it might > be air in the line but I have been unable to find any information on > what to do. Any help would be appreciated. I have just recently > changed out the cyan tank. > > > > Website: http://groups.yahoo.com/group/HPDesignJet_Printers > Post message: [email protected] > Subscribe: [EMAIL PROTECTED] > Unsubscribe: [EMAIL PROTECTED] > List owner: [EMAIL PROTECTED] > > Yahoo! Groups Links > > > > Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
