I have been getting some orange prints. HP tech thought that it might be the printheads after doing a printhead alignment it showed that the cyan was not doing what it should (banding and missing lines in the cyan areas). After doing an alignment check the next morning all was well but after printing an 8x10 and starting another, about halfway through it started the orange thing again. I had heard that it might be air in the line but I have been unable to find any information on what to do. Any help would be appreciated. I have just recently changed out the cyan tank.
Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
