Bill - I won Seal Commercial 210 dry mount, which I use for up to 18X24 prints, and I won a much larger press that I put in an insanely low bid on and didn't expect to get!! Had to make room in the garage for that one. The presses went pretty cheap, but watch for the shipping charges, because these are heavy. If you bid on one, inquire first about how clean the platen is. Gunk can build up over time if not used properly. All you will need after that is good foam core backboard, release paper, adhesive paper, and a tacking iron (or use a small portable travel iron). Most of the time I don't use the tacking iron, so it's not a necessity.
David --- In [email protected], Bill Elliott <[EMAIL PROTECTED]> wrote: > > David, could you give us details about the specific dry mount press > you bought on eBay and are very happy with? > > BTW, I'm enjoying the conversation. Thanks all. > > Bill > On Nov 19, 2008, at 11:33 AM, drdavidwcramer wrote: > > > I used both of the products mentioned, the 3M 568 Cold Mount and the > > 3M sprays (both repositionable and permanent) and found neither was > > satisfactory. I live in a dry climate, and still found that on > > occasion these mounts bubbled. Probably less than 10% of them, but > > even that's not good for business! So I now only dry mount, after > > applying a spray coat of PremierSheild. Haven't had any problems at > > all in over a year. I picked up a good used dry mount press on ebay > > for cheap and have been very happy. I use it for both DJ130 prints > > and B9180 prints. > > > > --- In [email protected], jim hein <jhein@> > > wrote: > > > > > > Doug: > > > Try this: > > > http://www.gaylordmart.com/adblock.asp? > > abid=505&sid=80FAA0EBC3E54C50BAA83FD90067CF&search_by=desc&search_for= > > adhesive%203m > > > > > > I have not used it but others on this forum have. > > > good luck > > > Jim > > > > > > On Wed, 2008-11-19 at 07:57 -0800, Doug Campbell wrote: > > > > I print with an HP DJ 130 and have had difficulty cold mounting > > HP > > > > Premium Plus prints to medium like matte and gator board. Would > > > > someone recommend an archival adhesive that is strong and > > reliable > > > > with the Premium Plus papers. > > > > > > > > Thanks in advance, > > > > > > > > Doug Campbell > > > > > > > > > > > > > > > > > ------------------------------------ Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
