Aaron
I have changed the loglevel to debug2(log everything)and restarted cups.
I have tried to print a small file, Here is output from error_log
On Fri, 20Stopping cups: [
OK ]
Starting cups: [ OK ]
[EMAIL PROTECTED] cups]# cd
[EMAIL PROTECTED] ~]# lp upgrade.log.syslog
request id is hp-313 (1 file(s))
[EMAIL PROTECTED] ~]# tail -f /var/log/cups/error_log
d [01/Sep/2006:20:31:29 +0200] copy_attribute(0xf8ca52f8, 0xf8ca5a18
[job-k-octets,2,21])
d [01/Sep/2006:20:31:29 +0200] copy_attribute(0xf8ca52f8, 0xf8ca3d90
[time-at-creation,2,21])
d [01/Sep/2006:20:31:29 +0200] copy_attribute(0xf8ca52f8, 0xf8ca3dd0
[time-at-processing,2,21])
d [01/Sep/2006:20:31:29 +0200] copy_attribute(0xf8ca52f8, 0xf8ca5b70
[time-at-completed,2,21])
d [01/Sep/2006:20:31:29 +0200] add_job_state_reasons(0xf6878008[8], 313)
D [01/Sep/2006:20:31:29 +0200] ProcessIPPRequest: 8 status_code=1
d [01/Sep/2006:20:31:29 +0200] ProcessIPPRequest: Adding fd 8 to
OutputSet...
d [01/Sep/2006:20:31:29 +0200] WriteClient: Removing fd 8 from
OutputSet...
d [01/Sep/2006:20:31:30 +0200] select_timeout: 31 seconds to send browse
update
d [01/Sep/2006:20:32:01 +0200] select_timeout: 31 seconds to send browse
update
d [01/Sep/2006:20:32:32 +0200] select_timeout: 31 seconds to send browse
update
Hank
io
06-09-01 at 08:00 -0700, Aaron J Albright wrote:
> Hank,
>
> following the instructions here: (issues 2)
>
> http://hplip.sourceforge.net/troubleshooting/printing.html
>
> setup the cups error log to debug, then lets try printing something and
> see what the cups log says.
>
> start this before you print: tail -f /var/log/cups/error_log
>
> then send the output.
>
> Aaron
>
> hgmiller wrote:
> > Aaron
> > Thanks for the e-mail. I am using FC3. Here is the output from hp-
> > check.Basic system info...
> > --> Linux walnut.localnet 2.6.9-1.667 #1 Tue Nov 2 14:41:25 EST 2004
> > i686 athlon i386 GNU/Linux
> >
> > Currently installed version...
> > --> 1.6.7
> >
> > Checking Python version...
> > --> Version 2.3.4 installed.
> > --> OK
> >
> > Checking for user interface dependencies...
> > Checking for SIP...
> > --> OK
> > Checking for PyQt...
> > --> OK
> > Checking Qt version...
> > --> Version 3.3.3 installed.
> > --> OK
> > Checking SIP version...
> > --> Version 4.1 installed
> > --> OK
> > Checking PyQt version...
> > --> Version 3.13.0 installed.
> > error: HPLIP may not function properly with the version of PyQt that is
> > installed (3.13.0).
> > error: Incorrect version of PyQt installed. Ver. 3.14 or greater
> > required.
> >
> > Checking for library dependencies...
> > Checking for libnetsnmp...
> > --> OK
> > Checking for libjpeg...
> > --> OK
> > Checking for libusb...
> > --> OK
> > Checking for libcrypto...
> > --> OK
> > Checking for libpthread...
> > --> OK
> >
> > Checking for application dependencies...
> > Checking ghostscript...
> > --> Version 7.07
> > Checking gcc...
> > --> gcc (GCC) 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)
> > --> OK
> > Checking make...
> > --> GNU Make 3.80
> > --> OK
> > Checking ReportLab (optional)...
> > warning: Not installed. Fax coverpage support will be disabled.
> >
> > Checking kernel module...
> > Checking for ppdev (optional)...
> > --> OK
> >
> > Checking for CUPS...
> > --> scheduler is running
> > --> OK
> >
> > Checking existing CUPS queues...
> > Pr Device URI HPLIP Installed?
> > in
> > te
> > r
> > -- ------------------------------------------- --------------------
> > hp hp:/usb/psc_1300_series?serial=MY497D91BN9F Yes
> >
> > vcups/err
> >
> > and from error_log
> >
> >
> > D [01/Sep/2006:12:44:13 +0200] AcceptClient: 10 from localhost:631.
> > D [01/Sep/2006:12:44:13 +0200] ReadClient: 10 POST / HTTP/1.1
> > D [01/Sep/2006:12:44:13 +0200] ProcessIPPRequest: 10 status_code=1
> > D [01/Sep/2006:12:44:13 +0200] ReadClient: 10 POST / HTTP/1.1
> > D [01/Sep/2006:12:44:13 +0200] ProcessIPPRequest: 10 status_code=1
> > D [01/Sep/2006:12:44:13 +0200] ReadClient: 10 POST / HTTP/1.1
> > D [01/Sep/2006:12:44:13 +0200] ProcessIPPRequest: 10 status_code=0
> > D [01/Sep/2006:12:44:13 +0200] ReadClient: 10 POST / HTTP/1.1
> > D [01/Sep/2006:12:44:13 +0200] ProcessIPPRequest: 10 status_code=1
> > D [01/Sep/2006:12:44:13 +0200] CloseClient: 10
> >
> > I seem to be able to print the cups test page but when I try to print
> > from ghostscript I just get blank pages
> >
> > Hank
> >
> >
> >
> > On Thu, 2006-08-31 at 08:29 -0700, Aaron J Albright wrote:
> >> Hank,
> >>
> >> The 1300 series PPD file should work fine with the PSC 1350. You may
> >> have some other condition causing this problem. What distro are you
> >> using? What version of HPLIP? can you run hp-check and post the output?
> >> Also setup cups to loglevel debug,
> >>
> >> http://hplip.sourceforge.net/troubleshooting/printing.html
> >>
> >> issue 2 for how to do the cups setup.
> >>
> >> Then run tail -f /var/log/cups/error_log and try and print and post that
> >> output as well. My first thought is that you could have a ghostscript
> >> problem. But we'll need the logs to be able to say for sure.
> >>
> >> Aaron
> >>
> >> hgmiller wrote:
> >>> I have been trying to set up a hp psc 1350 printer with hplip. I have
> >>> tried both the 1300 and the 1310 ppd file. In both cases only blank
> >>> pages are printed. Is there some where I can get the ppd file for this
> >>> printer.
> >>> Hank Miller
> >>>
> >>>
> >>> -------------------------------------------------------------------------
> >>> Using Tomcat but need to do more? Need to support web services, security?
> >>> Get stuff done quickly with pre-integrated technology to make your job
> >>> easier
> >>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> >>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> >>> _______________________________________________
> >>> HPLIP-Help mailing list
> >>> [email protected]
> >>> https://lists.sourceforge.net/lists/listinfo/hplip-help
> >>>
> >
> >
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help
