Yes that information helps but I am wondering how do i find out the ip my
printer has, i checked my cups and i have this:
*Device URI:* hp:/par/PSC_500?device=/dev/parport0
how can I make my scan function by using this string, do you have any idea?
On 2/1/07, J_Lewis <[EMAIL PROTECTED]> wrote:
Additional information I didn't see all of your reply immediately.
---------- Forwarded message ----------
From: J_Lewis <[EMAIL PROTECTED]>
To: J_Lewis <[EMAIL PROTECTED]>
Date: Thu, 01 Feb 2007 19:27:26 -0800
Subject: Re: [Hplip-help] Have Similar prob;lem to gentoo amd64 user
J_Lewis wrote:
> Alvaro Proaño wrote:
>
>> I just read this and I am wondering how were you able to scan using "*
>> I've worked on this problem for 2 weeks now to no avail (although I
>> can scan over http://192.168.1.105 <http://192.168.1.105/> where the
>> HP interface opens up) I just can't get the scanner to be recognized
>> under sane or xsane."
>> *I would like to try that out, any advice, tutorials? I would like to
>> scan.*
>> *
>> On 2/1/07, *J_Lewis* <[EMAIL PROTECTED]
>> <mailto:[EMAIL PROTECTED]>> wrote:
>>
>> *I'm running suse 10.2 with I think hplip 1.7 (I say I think
>> because it had errors on the install) It keeps saying I need
>> libnetsnmp-devel
>> , but when I try to install the library I come up with dependency
>> issues which are too **numerous to list) here's a listing of the
>> command "hp-check"*
>> HP Linux Imaging and Printing System (ver. 1.7.1)
>> Dependency/Version Check Utility ver. 5.2
>> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
>> This software comes with ABSOLUTELY NO WARRANTY.
>> This is free software, and you are welcome to distribute it
>> under certain conditions. See COPYING file for more details.
>>
>> ---------------
>> | SYSTEM INFO |
>> ---------------
>> Basic system information:
>> Linux linux 2.6.18.2-34-default #1 SMP Mon Nov 27 11:46:27 UTC
>> 2006 x86_64 x86_64 x86_64 GNU/Linux
>> Detected distro (/etc/issue):
>> suse 10.2
>> Detected distro (lsb_release):
>> SUSE LINUX 10.2 (n/a)
>> Currently installed HPLIP version...
>> HPLIP 1.7.1 currently installed in '/usr/share/share/hplip'.
>> Current contents of '/etc/hp/hplip.conf' file:
>> # hplip.conf
>> [hpiod]
>> # port=0 (dynamic IP port)
>> port=2208
>> [hpssd]
>> # port=0 (dynamic IP port)
>> port=2207
>> [hplip]
>> version=1.7.1
>> jdprobe=0
>> [dirs]
>> home=/usr/share/share/hplip
>> run=/var/run
>> ppd=/usr/share/share/ppd/HP
>> doc=/usr/share/share/doc/hplip-1.7.1
>> # Following values are determined at configure time and cannot be
>> changed.
>> [configure]
>> network-build=0
>> pp-build=0
>> gui-build=1
>> scanner-build=1
>> fax-build=0
>> installinitd=/usr/lib/lsb/install_initd
>> chkconfig=/sbin/chkconfig
>> internal-tag=1.7.1.5 <http://1.7.1.5>
>>
>> HPLIP running?
>> No, HPLIP is not running (OK).
>> HPOJ running?
>> No, HPOJ is not running (OK).
>> Checking Python version...
>> OK, version 2.5.0 installed
>> Checking PyQt version...
>> OK, version 3.14 installed.
>> Checking SIP version...
>> OK, Version 4.2.1 installed
>> ----------------
>> | DEPENDENCIES |
>> ----------------
>>
>> Checking for dependency libcrypto - OpenSSL cryptographic
library...
>> OK, found.
>> Checking for dependency gcc - GNU Project C and C++ Compiler...
>> OK, found.
>> Checking for dependency SANE - Scanning library...
>> OK, found.
>> Checking for dependency GhostScript - PostScript and PDF language
>> interpreter and previewer...
>> OK, found.
>> Checking for dependency libjpeg - JPEG library...
>> OK, found.
>> Checking for dependency libpthread - POSIX threads library...
>> OK, found.
>> Checking for dependency make - GNU make utility to maintain groups
>> of programs...
>> OK, found.
>> Checking for dependency python-devel - Python development files...
>> OK, found.
>> Checking for dependency Reportlab - PDF library for Python...
>> error: Not found!
>> This is an OPTIONAL dependency. Some HPLIP functionality may not
>> function properly.
>> Checking for dependency PyQt - Qt interface for Python...
>> OK, found.
>> Checking for dependency cups-devel- Common Unix Printing System
>> development files...
>> OK, found.
>> Checking for dependency ppdev - Parallel port support kernel
>> module....
>> error: Not found!
>> This is an OPTIONAL dependency. Some HPLIP functionality may not
>> function properly.
>> Checking for dependency libusb - USB library...
>> OK, found.
>> Checking for dependency scanimage - Shell scanning program...
>> OK, found.
>> Checking for dependency libnetsnmp-devel - SNMP networking library
>> development files...
>> error: Not found!
>> error: This is a REQUIRED dependency. Please make sure that this
>> dependency is installed before installing or running HPLIP.
>> Checking for dependency Python 2.2 or greater - Python programming
>> language...
>> OK, found.
>> Checking for dependency LSB - Linux Standard Base support...
>> OK, found.
>> Checking for dependency xsane - Graphical scanner frontend for
SANE...
>> OK, found.
>> Checking for dependency cups - Common Unix Printing System...
>> OK, found.
>> Checking for dependency Python 2.3 or greater - Required for fax
>> functionality...
>> OK, found.
>>
>> ----------------------
>> | INSTALLED PRINTERS |
>> ----------------------
>>
>> KONICA_MINOLTA_magicolor_2300_DL_192.168.1.104
>> ----------------------------------------------
>> Device URI: socket://192.168.1.104
>> Installed in HPLIP? No
>> PPD:
/etc/cups/ppd/KONICA_MINOLTA_magicolor_2300_DL_192.168.1.104.ppd
>> PPD Description: KonicaMinolta magicolor 2430 DL Foomatic/foo2zjs
>> Printer status: printer
>> KONICA_MINOLTA_magicolor_2300_DL_192.168.1.104 is idle. enabled
>> since Thu 01 Feb 2007 01:04:43 PM PST
>> error: Printer is not HPLIP installed. Printers must use the hp:
>> or hpfax: CUPS backend to function in HPLIP.
>> Photosmart_2570_series_192.168.1.105
>> ------------------------------------
>> Device URI: socket://192.168.1.105:9100,192.168.1.105:9101
>> <http://192.168.1.105:9101>, 192.168.1.105:9102
>> <http://192.168.1.105:9102>
>> Installed in HPLIP? No
>> PPD: /etc/cups/ppd/Photosmart_2570_series_192.168.1.105.ppd
>> PPD Description: HP PhotoSmart 2570 Foomatic/hpijs (recommended)
>> Printer status: printer Photosmart_2570_series_192.168.1.105 is
>> idle. enabled since Mon 29 Jan 2007 03:36:09 PM PST
>> error: Printer is not HPLIP installed. Printers must use the hp:
>> or hpfax: CUPS backend to function in HPLIP.
>>
>> ----------------------
>> | SANE CONFIGURATION |
>> ----------------------
>> 'hpaio' in /etc/sane.d/dll.conf'...
>> OK, found. SANE backend 'hpaio' is properly set up.
>> Checking output of 'scanimage -L'...
>> No scanners were identified. If you were expecting something
>> different,
>> check that the scanner is plugged in, turned on and detected by the
>> sane-find-scanner tool (if appropriate). Please read the
documentation
>> which came with this software (README, FAQ, manpages).
>>
>> ---------------------
>> | PYTHON EXTENSIONS |
>> ---------------------
>> Checking 'cupsext' CUPS extension...
>> OK, found.
>> Checking 'pcardext' Photocard extension...
>> OK, found.
>>
>> 5 errors were detected.
>> Please refer to the installation instructions at:
>> http://hplip.sourceforge.net/install/index.html
>>
>> *My printer works fine, but sane can't find my scanner.
>> I've opened up ports 2207 2208 (which I presume are for the
>> scanner) and 9100 9101 9102 which I had to use to finally get my
>> HP printer working.
>> I've worked on this problem for 2 weeks now to no avail (although
>> I can scan over http://192.168.1.105 where the HP interface opens
>> up) I just can't get the scanner to be recognized under sane or
>> xsane.*
>>
>>
-------------------------------------------------------------------------
>> Using Tomcat but need to do more? Need to support web services,
>> security?
>> Get stuff done quickly with pre-integrated technology to make your
>> job easier.
>> Download IBM WebSphere Application Server v.1.0.1 based on Apache
>> Geronimo
>>
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>> <
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642>
>>
>> _______________________________________________
>> HPLIP-Help mailing list
>> [email protected]
>> <mailto:[email protected]>
>> https://lists.sourceforge.net/lists/listinfo/hplip-help
>> <https://lists.sourceforge.net/lists/listinfo/hplip-help>
>>
>>
>>
>>
> Yes I can scan over the http:// connection
>
>
-------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services,
security?
> Get stuff done quickly with pre-integrated technology to make your job
easier.
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> HPLIP-Help mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/hplip-help
>
>
Apparently there is a server built into the printer that comes up when I
simply type in http://192.168.1.105 in Firefox.
I was only able to get printing working after opening (3) ports
(9100,9101,9102) at that address and according to the readout of
hp-check hplip is not running. I don't know either, but somehow I am
able to print without hplip.
I have some more information if you would like it.
Am I sending this correctly ? I'm just hitting reply in Thunderbird.
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help
