Arno-
If you are trying to use HPLIP, you cannot use HPOJ at the same time - they
are not compatible.
HPOJ does not support faxing. "mlcd" is part of HPOJ. If you are running
this, HPLIP will not work. HPOJ is an older version of HPLIP that is no
longer supported.
Please uninstall HPOJ and re-install HPLIP. Make sure HPOJ is not running
when you try to use HPLIP.
-Don
On 2/17/07, Arno Jung <[EMAIL PROTECTED]> wrote:
sorry, but I must tell you, I found, why "mlc" isn't installed.
Please look in the SuSE-10.2 packet "hp-officeJet".
This packet can't be installed, why there is in it HPOJ.
Without this packet we don't have "mlc" and "mlcd"
Pease pay attention:
with the setup of this packet (/usr/sbin/ptal-init setup)
we don't get the right device for hpfax.
I think, hplip need a new file for mlc
with a new hp-setup including mlc for fax
Thank you for your regard
Arno
#+#+#+#+#+#+#+#
Arno Jung schrieb:
> Arno Jung schrieb:
>> hi all SuSE-10.2, HP OJ 5110, hplip-1.7.1-14.1.i586.rpm,
>> hplip-hpijs-1.7.1-14.1.i586.rpm please see my comment at the
>> end
>>
>> - - - - - - - - -begin (1)- - - - - - -
>>
> [ . . . ]
>>
> please tell me, why my hp doesn't send fax?
>>
> [ . . . .]
>
> /var/log/messages (part - shortened) Feb 17 09:47:06 arju hpiod:
> unable to read MlcReverseCmd header: Resource temporarily
> unavailable Feb 17 09:47:06 arju hpiod: invalid MlcCredit from
> peripheral Feb 17 09:47:06 arju python: hp-sendfax[5431] error:
> Channel write error
>
> #+#+#+#+#+#+#
>
> Now I looked at the following: (and so on)
> /usr/share/doc/packages/hplip/tech_docs/overview.html HPLIP
> provides a MLC/1284.4 transport for talking to Multi-Function
> Peripherals (MFPs), but HPLIP does not dedicate the port to
> MLC/1284.4 like HPOJ does. HPLIP brings MLC/1284.4 up and down as
> needed. This means a MFP can use raw I/O for printing and
> MLC/1284.4 for scanning
>
> M printer : hp:/usb/OfficeJet_5110?serial=CN31QB20W52Q
>
> What can I do / what must I do? I have libusb, no raw, no ESP for
> parport, no ptal
>
> part of dmesg: drivers/usb/class/usblp.c: usblp0: USB
> Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid
> 0x1A11 usbcore: registered new driver usblp
>
> to day, I think, the "the up and down" for MLC don't work
> correctly for "fax send". Please check it again. Thank you.
>
> Regards Arno
>
>
-------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT Join
> SourceForge.net's Techsay panel and you'll get the chance to
> share your opinions on IT & business topics through brief
> surveys-and earn cash
>
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________ HPLIP-Help
> mailing list [email protected]
> https://lists.sourceforge.net/lists/listinfo/hplip-help
>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share
your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/hplip-help
