On 08/14/2007 12:06 AM, Cauligi, Raghothama S wrote: > Yes, that is the correct mapping (to deskjet 5600). > I will get the ppds verified. > I think you misunderstood, since I messed up the diff.. The original was mapped to 5600, which changed the margins and caused the cups test page to be printed in bits over several pages. The apparently correct mapping, which I was able to determine via an older saved ppd I used for a while, is to 5550. I'm sorry, the diff was backwards. The one with best is the corrected ppd that is working fine now. the one with 277 is the orig. Looks like I messed up the file order for the diff. Corrected: --- HP_PSC2175-277.ppd 2007-08-11 09:10:43.000000000 +0800 +++ HP_PSC2175-best.ppd 2007-08-11 09:26:52.000000000 +0800 @@ -100,7 +100,7 @@ *FoomaticRIPOption Model: enum CmdLine A 100 *FoomaticRIPOptionSetting Model=HP-PSC_2175: " -sDeviceManufacturer=&q&& -uot;HEWLETT-PACKARD" -sDeviceModel="deskjet 5600"" +uot;HEWLETT-PACKARD" -sDeviceModel="deskjet 5550"" *End *OpenGroup: General/General
Sorry for the confusion. :-( > On 08/09/2007 11:28 PM, Cauligi, Raghothama S wrote: > >> Looks like your papersize selection is set to A4 with the new ppd but >> was Letter in the older one. >> Select the papersize in the CUPS printer options page >> (http://localhost:631/printers) >> Raghu >> >> > Sorry, but I just forgot to reset that setting when I copied out the ppd > from the 2.7.7 version, which defaults to A4. I had set it Letter when > testing. I have found the exact setting causing the problem by some > testing. The correct diff follows: > > --- HP_PSC2175-best.ppd 2007-08-11 09:26:52.000000000 +0800 > +++ HP_PSC2175-277.ppd 2007-08-11 09:10:43.000000000 +0800 > @@ -100,7 +100,7 @@ > > *FoomaticRIPOption Model: enum CmdLine A 100 *FoomaticRIPOptionSetting > Model=HP-PSC_2175: " -sDeviceManufacturer=&q&& > -uot;HEWLETT-PACKARD" -sDeviceModel="deskjet 5550"" > +uot;HEWLETT-PACKARD" -sDeviceModel="deskjet 5600"" > *End > > *OpenGroup: General/General > > Since all the other changes from the driver that worked correctly seemed > trivial, i.e. paper sizes, etc., and since this one looked most > promising to test, I just changed the 5600 to the 5550, and the cups > test page printed out correctly as well as the document form I first > noticed the problem with. So, the fix, at least for my PSC 2175, is the > above diff > >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of Joe >> Morris (NTM) >> Sent: Thursday, August 09, 2007 5:09 AM >> To: hplip-help@lists.sourceforge.net >> Subject: [Hplip-help] Printer driver problem >> >> I am presently running hplip 2.7.7 on openSUSE 10.2 with an PSC 2175, >> which works quite well. I have had this printer for approx 3 years. >> I recently noticed on a form I print monthly that the margin was off >> by >> 1/8 inch (I print to Letter size). The page prints fine, but is >> transposed to the right 1/8 inch. In the process of troubleshooting, >> I discovered the CUPS test page does not print on one page, but bits >> are printed on several (I stop the print job after 3 or 4 sheets.) My >> > > >> form prints off by 1/8 inch, i.e margin is set to .5 inch, but prints >> .625 inches, making the right margin closer to the edge by the same. >> I checked the driver and it has not changed in the 3 versions I have >> locally (1.7.2, 2.7.6, and 2.7.7). I tried an older driver I had >> downloaded a few years ago from linuxprinting.org, and everything >> prints perfectly again. My form prints correctly aligned, and the >> CUPS test page prints correctly on 1 page. >> <snip old incorrect diff> >> >> -- Joe Morris Registered Linux user 231871 running openSUSE 10.2 x86_64 ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
