>From my original post:
>>> I've combed the ht://dig site looking for information on where to >>>
change configuration attributes
(http://www.htdig.org/dev/htdig-3.2/attrs.html), with no success.
DAdams >Attribute allow_numbers *is* clearly documented in the web
DAdams >page you refer to (http://www.htdig.org/dev/htdig-3.2/attrs.html).
I was looking for info on changing/adding attributes. Obviously attrs.html
lists every attribute available with full details on each.
No worries, though. I did locate the information on
http://www.htdig.org/confindex.html. I would have added a link from
attrs.html to confindex.html (ex: click 'here' for instructions on how add
attributes to the htdig.conf file) if it were my site, but at least the info
is there to be found.
Regards,
Mike
-----Original Message-----
From: David Adams [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 07, 2001 3:59 AM
Subject: Re: [htdig] Configuration attributes
Attribute allow_numbers *is* clearly documented in the web page you refer to
(http://www.htdig.org/dev/htdig-3.2/attrs.html).
There is no mechanism to index only words of a given length. You could set
minimum_word_length to 4 and index only words and numbers of four or more
characters.
--
David Adams
Computing Services
Southampton University
_______________________________________________
htdig-general mailing list <[EMAIL PROTECTED]>
To unsubscribe, send a message to
<[EMAIL PROTECTED]> with a subject of unsubscribe
FAQ: http://htdig.sourceforge.net/FAQ.html
_______________________________________________
htdig-general mailing list <[EMAIL PROTECTED]>
To unsubscribe, send a message to <[EMAIL PROTECTED]> with a
subject of unsubscribe
FAQ: http://htdig.sourceforge.net/FAQ.html
