Firstly running OSX 10.6.4, and Hugin 2010.4.0. There was a lengthy period under OS X10.5 that it just was not working, weird results, and a period before that that Hugin was famous. Wonderful. Can see lots of work done by dedicated people over the last year, with four releases last year. So keen to get this back up and working again and finish a number of simple panorama stitchings.
It has been a few days now since I have downloaded this latest edition of Hugin. Have read through all the docs, downloaded the additional two most common control point detectors, noting patent restrictions. Have read through tutorials (learnt a lot of new things one can do with Hugin - I am quite excited). Following all directions, I still find the control point detectors seem to not be loading, so unless I manually identify control points, no way to stitch. Slow work .... I have searched and found the discussion on this group by Photo Novice Jun 12 2010 (thank you), were in, these instructions to activate control point detectors is once again presented. ___ If you go to (menu) "Hugin->Preferences->Control Point Detectors", you will find a number of cp-detectors. the autopano-sift-c and panomatic come pre-configured but without the path to them. Just select "Edit" for the cp-detector and for program use the "choose" button. The file dialog will automatically open inside the folder where panomatic and/or autopano-sift-c are installed. __ Confirm all this, and done this. And still no control point detectors active when opening a series of photos. Clearly with no other swath of posts from other OSX users, I am missing something really obvious! And I am going to be red faced when I discover it, but well, have to face that to solve why. So any suggestions. I just realised the one thing I have not done is a full restart. Should not be necessary, but leave no stone unturned. If that works, I'll post back, if not, open to suggestions. Thanks. C. -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx
