On 5 Feb., 01:29, C <[email protected]> wrote:
> Also, once having loaded pictures and clicking to generate control > points, check that the photos in the control point tag page are in the > correct order. eg photo 0 paried with photo 1, then photo 2, etc for a > panorama. You may find them paired 0,0, then 1,1, with no control > points listed or showing. Once you pair them correctly, the control > points will show and be listed. This may have been a unique problem, > but noting in case it occurs for others. This looks to me like you are confused by the initial display of the control point editor tab. When you first open the tab, the same image is displayed on the left and the right side. This does not mean they are actually 'paired' in some way, it's just the initial setting. Which image is displayed on each side can be freely chosen by using the down arrow buttons and choosing the image. If this is indeed what your initial problem was, it shows that the default behaviour is worse than what I find it to be: a nuisance. The only situation where the same image needs to be displayed on the left and right side is when editing 'line' control points, which probably isn't the most frequent activity, particularly not for beginners. I'd therefore propose to change the default behaviour to start out with images 0 and 1, provided there are at least two images in the project. This has a much greater chance of being instantly useful, and changing this shouldn't be too much effort. Kay -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx
