Hi Giulio
On 01/13/2012 08:50 PM, Giulio wrote:
On 13 Gen, 13:36, "Carlos Eduardo G. Carvalho (Cartola)"
Thank you, I have tried following your steps but the image is deformed
(it appears on the lower side of the panosphere and is not centered)
and the exposures are modified (the brighter one is more bright, the
darker one is less dark).
So i still don't understand.
This is how I would do this
o Load the three images into hugin
o In the "Images" tab, change the stack for all photos
to Stack 0 using the "Change stack" button on the right
o Click the "Link" tick mark in the "Image Position" part
of the screen: It has to be unchecked, otherwise the
photos won't get aligned.
o In the 'Feature Matching" part of the screen below,
choose your preferred CP find method and press the
"Create control points" button afterwards.
o Switch to the optimizer tab and set the strategie
to "Position (incremental, starting from anchor)".
o If you are not satisfied with the resulting
distances, use the "Show control points" icon in the
top menu bar to get a list with all CPs. By clicking
into the "Distance" header, you can sort them by
distance, select the worst offenders and delete them.
repeat the optimization afterwards and don't expect to
get to a 0.0 distance.
o Switch to the "Stitcher" tab and set the Projection to
"Rectilinear". Afterwards, use
- "Calculate Field of View"
- "Calculate Optimal Size" and
- "Fit Crop to images"
buttons to set the geometry of the results.
o If you want to get the aligned images only, deselect
all output types in the "Panorama Outputs", "Remapped
Images", "Combined stacks" and "Layers" section. Only
"No exposure correction, low dynamic range" in the
"Remapped Images" section has to be activated.
You can play around with the other options later.
o Press "Stitch!" and enjoy!
Regards
Stefan Peter
--
In theory there is no difference between theory and practice. In
practice there is.
--
You received this message because you are subscribed to the Google Groups "Hugin and
other free panoramic software" group.
A list of frequently asked questions is available at:
http://wiki.panotools.org/Hugin_FAQ
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at http://groups.google.com/group/hugin-ptx
