On 14 Gen, 12:51, Stefan Peter <[email protected]> wrote: > Hi Giulio > > On 01/13/2012 08:50 PM, Giulio wrote: > > > On 13 Gen, 13:36, "Carlos Eduardo G. Carvalho (Cartola)" > > Thank you, I have tried following your steps but the image is deformed > > (it appears on the lower side of the panosphere and is not centered) > > and the exposures are modified (the brighter one is more bright, the > > darker one is less dark). > > > So i still don't understand. > > This is how I would do this > o Load the three images into hugin > o In the "Images" tab, change the stack for all photos > to Stack 0 using the "Change stack" button on the right > o Click the "Link" tick mark in the "Image Position" part > of the screen: It has to be unchecked, otherwise the > photos won't get aligned. > o In the 'Feature Matching" part of the screen below, > choose your preferred CP find method and press the > "Create control points" button afterwards. > o Switch to the optimizer tab and set the strategie > to "Position (incremental, starting from anchor)". > o If you are not satisfied with the resulting > distances, use the "Show control points" icon in the > top menu bar to get a list with all CPs. By clicking > into the "Distance" header, you can sort them by > distance, select the worst offenders and delete them. > repeat the optimization afterwards and don't expect to > get to a 0.0 distance. > o Switch to the "Stitcher" tab and set the Projection to > "Rectilinear". Afterwards, use > - "Calculate Field of View" > - "Calculate Optimal Size" and > - "Fit Crop to images" > buttons to set the geometry of the results. > o If you want to get the aligned images only, deselect > all output types in the "Panorama Outputs", "Remapped > Images", "Combined stacks" and "Layers" section. Only > "No exposure correction, low dynamic range" in the > "Remapped Images" section has to be activated. > You can play around with the other options later. > o Press "Stitch!" and enjoy!
Great explanation! After all, it wasn't so easy. Thank you! Problem solved. -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx
