Yeah, I didn`t answer before cause I was waiting to have a calm moment to do the steps using the tool, in order not to miss that much number of steps again. In fact I never did it in hugin, only on the command line. It is made to do much more than this, so it is really not simple to use it for aligning only.
Good luck! Carlos E G Carvalho (Cartola) http://cartola.org/360 2012/1/14 Giulio <[email protected]> > On 14 Gen, 12:51, Stefan Peter <[email protected]> wrote: > > Hi Giulio > > > > On 01/13/2012 08:50 PM, Giulio wrote: > > > > > On 13 Gen, 13:36, "Carlos Eduardo G. Carvalho (Cartola)" > > > Thank you, I have tried following your steps but the image is deformed > > > (it appears on the lower side of the panosphere and is not centered) > > > and the exposures are modified (the brighter one is more bright, the > > > darker one is less dark). > > > > > So i still don't understand. > > > > This is how I would do this > > o Load the three images into hugin > > o In the "Images" tab, change the stack for all photos > > to Stack 0 using the "Change stack" button on the right > > o Click the "Link" tick mark in the "Image Position" part > > of the screen: It has to be unchecked, otherwise the > > photos won't get aligned. > > o In the 'Feature Matching" part of the screen below, > > choose your preferred CP find method and press the > > "Create control points" button afterwards. > > o Switch to the optimizer tab and set the strategie > > to "Position (incremental, starting from anchor)". > > o If you are not satisfied with the resulting > > distances, use the "Show control points" icon in the > > top menu bar to get a list with all CPs. By clicking > > into the "Distance" header, you can sort them by > > distance, select the worst offenders and delete them. > > repeat the optimization afterwards and don't expect to > > get to a 0.0 distance. > > o Switch to the "Stitcher" tab and set the Projection to > > "Rectilinear". Afterwards, use > > - "Calculate Field of View" > > - "Calculate Optimal Size" and > > - "Fit Crop to images" > > buttons to set the geometry of the results. > > o If you want to get the aligned images only, deselect > > all output types in the "Panorama Outputs", "Remapped > > Images", "Combined stacks" and "Layers" section. Only > > "No exposure correction, low dynamic range" in the > > "Remapped Images" section has to be activated. > > You can play around with the other options later. > > o Press "Stitch!" and enjoy! > > Great explanation! After all, it wasn't so easy. > > Thank you! > > Problem solved. > > -- > You received this message because you are subscribed to the Google Groups > "Hugin and other free panoramic software" group. > A list of frequently asked questions is available at: > http://wiki.panotools.org/Hugin_FAQ > To post to this group, send email to [email protected] > To unsubscribe from this group, send email to > [email protected] > For more options, visit this group at > http://groups.google.com/group/hugin-ptx > -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx
