On 04/26/2016 04:57 PM, Michael Perryman wrote: > Thank you for assisting, Vladimir. > > Control Point Detection setting has no effect if you created the points >> manually. >> > > .... if the CPD setting has no effect when creating the points manually, > where do I set the arguments (e.g. -S and -x)? >
You can either run align_image_stack from commandline, with the arguments above, let it save pto file ( -p argument ) and open it in hugin gui, or you can call align_image_stack as control point detector from hugin gui. In this case hugin just takes the detected control points and ignores everything else, so you have to set the optimized parameters manually. > >> From the screenshot it seems that you left the optimized parameters on >> the default "Positions". You should set it to "Custom parameters", go to >> the optimizer tab and enable optimization of yaw, pitch, roll and X on >> the second image. > > > ... I have now tried this, and it has no effect at all on the large > differences and errors. > > Are the curved lines in my images (fig2) what I would expect? Actually no. There should be points or short horizontal lines. One more thing: the output projection should be rectilinear. But this change does not make that big difference in alignment, at least on my images. Maybe there are some incorrect values left. In the optimizer tab, all parameters should be zero, except for HFOV and yaw, pitch, roll and X of the second image. > > Is it correct that I have set all points to "Horizontal" except for one set > as "normal"? Yes, this is correct. > > I'm sorry, I am still missing something! > Vladimir -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/571F8D4E.1050806%40suse.cz. For more options, visit https://groups.google.com/d/optout.
