Hello Pavan, This was indeed changed a long time ago when Jeff brought the embedding support. I have nothing against bumping prereq to 2.64. But I'd rather have Jeff look at the missing "-I m4". Brice
Le 28/11/2011 04:19, Pavan Balaji a écrit : > > [reviving an ancient email thread] > > I was poking around with hwloc-1.3 on an old machine I had, and I ran > into the below problem again. I remembered sending an email about it, > so I dug in my archives to find this email; again the problem was > autoconf-2.63. The Makefile.am patch that Jeff provided below seems to > have been reverted in the current version of hwloc. > > You should consider either updating hwloc's autoconf prereq to 2.64 or > fixing this. Btw, updating the prereq won't really help in this case > (the error happens at autogen.sh time), but the prereq should still be > accurate, IMO. > > -- Pavan > > On 11/06/2009 04:22 AM, Pavan Balaji wrote: >> >> Thanks. That worked. >> >> -- Pavan >> >> On 11/05/2009 01:56 PM, Jeff Squyres wrote: >>> Ok, I see the issue. Apply the attached patch and see if that works >>> for >>> you. >>> >>> I'd prefer not to do another release today, if possible. ;-) >>> >>> >>> On Nov 5, 2009, at 2:50 PM, Jeff Squyres (jsquyres) wrote: >>> >>>> (re-subjected to be accurate) >>>> >>>> I notice that my autogen.sh outputs: >>>> >>>> autoreconf: running: aclocal -I m4 --force -I config >>>> >>>> but yours outputs: >>>> >>>> autoreconf: running: aclocal --force -I config >>>> >>>> >>>> where's the "-I m4"? >>>> >>>> ....ah, I see you're running AC 2.63. I'm running AC 2.64. I just >>>> tried with AC 2.63 and I see the same problem. Lemme see if I can get >>>> a workaround. >>>> >>> >>> >>> >>> ------------------------------------------------------------------------ >>> >>> >>> _______________________________________________ >>> hwloc-devel mailing list >>> hwloc-de...@open-mpi.org >>> http://www.open-mpi.org/mailman/listinfo.cgi/hwloc-devel >> >