From: Seth Heasley <[EMAIL PROTECTED]>
Add the Intel Ibex Peak (PCH) SMBus Controller DeviceIDs.
Signed-off-by: Seth Heasley <[EMAIL PROTECTED]>
Cc: Jean Delvare <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-i801.c | 3 +++
2 files changed, 4 insertions(+)
diff -puN
drivers/i2c/busses/Kconfig~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
drivers/i2c/busses/Kconfig
---
a/drivers/i2c/busses/Kconfig~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
+++ a/drivers/i2c/busses/Kconfig
@@ -97,6 +97,7 @@ config I2C_I801
ICH9
Tolapai
ICH10
+ PCH
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff -puN
drivers/i2c/busses/i2c-i801.c~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
drivers/i2c/busses/i2c-i801.c
---
a/drivers/i2c/busses/i2c-i801.c~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
+++ a/drivers/i2c/busses/i2c-i801.c
@@ -41,6 +41,7 @@
Tolapai 0x5032 32 hard yes yes yes
ICH10 0x3a30 32 hard yes yes yes
ICH10 0x3a60 32 hard yes yes yes
+ PCH 0x3b30 32 hard yes yes yes
Features supported by this driver:
Software PEC no
@@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] =
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_2) },
{ 0, }
};
@@ -599,6 +601,7 @@ static int __devinit i801_probe(struct p
case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
case PCI_DEVICE_ID_INTEL_ICH10_4:
case PCI_DEVICE_ID_INTEL_ICH10_5:
+ case PCI_DEVICE_ID_INTEL_PCH_2:
i801_features |= FEATURE_I2C_BLOCK_READ;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801DB_3:
_
_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c
