Hi Andrew,
On Wed, 20 Aug 2008 16:45:26 -0700, [EMAIL PROTECTED] wrote:
> From: Seth Heasley <[EMAIL PROTECTED]>
>
> Add the Intel Ibex Peak (PCH) SMBus Controller DeviceIDs.
>
> Signed-off-by: Seth Heasley <[EMAIL PROTECTED]>
> Cc: Jean Delvare <[EMAIL PROTECTED]>
> Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
> ---
>
> drivers/i2c/busses/Kconfig | 1 +
> drivers/i2c/busses/i2c-i801.c | 3 +++
> 2 files changed, 4 insertions(+)
I have this patch in my tree already, but I can't export it, because it
depends on a pci_ids.h patch which is not yet in Linus' tree.
>
> diff -puN
> drivers/i2c/busses/Kconfig~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
> drivers/i2c/busses/Kconfig
> ---
> a/drivers/i2c/busses/Kconfig~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
> +++ a/drivers/i2c/busses/Kconfig
> @@ -97,6 +97,7 @@ config I2C_I801
> ICH9
> Tolapai
> ICH10
> + PCH
>
> This driver can also be built as a module. If so, the module
> will be called i2c-i801.
> diff -puN
> drivers/i2c/busses/i2c-i801.c~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
> drivers/i2c/busses/i2c-i801.c
> ---
> a/drivers/i2c/busses/i2c-i801.c~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
> +++ a/drivers/i2c/busses/i2c-i801.c
> @@ -41,6 +41,7 @@
> Tolapai 0x5032 32 hard yes yes yes
> ICH10 0x3a30 32 hard yes yes yes
> ICH10 0x3a60 32 hard yes yes yes
> + PCH 0x3b30 32 hard yes yes yes
>
> Features supported by this driver:
> Software PEC no
> @@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] =
> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
> + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_2) },
> { 0, }
> };
>
> @@ -599,6 +601,7 @@ static int __devinit i801_probe(struct p
> case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
> case PCI_DEVICE_ID_INTEL_ICH10_4:
> case PCI_DEVICE_ID_INTEL_ICH10_5:
> + case PCI_DEVICE_ID_INTEL_PCH_2:
> i801_features |= FEATURE_I2C_BLOCK_READ;
> /* fall through */
> case PCI_DEVICE_ID_INTEL_82801DB_3:
> _
--
Jean Delvare
_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c
