On Wed, 20 Aug 2008 23:55:41 -0700, Andrew Morton wrote:
> On Thu, 21 Aug 2008 08:44:46 +0200 Jean Delvare <[EMAIL PROTECTED]> wrote:
>
> > Hi Andrew,
> >
> > On Wed, 20 Aug 2008 16:45:26 -0700, [EMAIL PROTECTED] wrote:
> > > From: Seth Heasley <[EMAIL PROTECTED]>
> > >
> > > Add the Intel Ibex Peak (PCH) SMBus Controller DeviceIDs.
> > >
> > > Signed-off-by: Seth Heasley <[EMAIL PROTECTED]>
> > > Cc: Jean Delvare <[EMAIL PROTECTED]>
> > > Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
> > > ---
> > >
> > > drivers/i2c/busses/Kconfig | 1 +
> > > drivers/i2c/busses/i2c-i801.c | 3 +++
> > > 2 files changed, 4 insertions(+)
> >
> > I have this patch in my tree already, but I can't export it, because it
> > depends on a pci_ids.h patch which is not yet in Linus' tree.
>
> Sigh.
>
> > >
> > > diff -puN
> > > drivers/i2c/busses/Kconfig~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
> > > drivers/i2c/busses/Kconfig
> > > ---
> > > a/drivers/i2c/busses/Kconfig~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
> > > +++ a/drivers/i2c/busses/Kconfig
> > > @@ -97,6 +97,7 @@ config I2C_I801
> > > ICH9
> > > Tolapai
> > > ICH10
> > > + PCH
> > >
> > > This driver can also be built as a module. If so, the module
> > > will be called i2c-i801.
> > > diff -puN
> > > drivers/i2c/busses/i2c-i801.c~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
> > > drivers/i2c/busses/i2c-i801.c
> > > ---
> > > a/drivers/i2c/busses/i2c-i801.c~i2c-i801-smbus-patch-for-intel-ibex-peak-deviceids
> > > +++ a/drivers/i2c/busses/i2c-i801.c
> > > @@ -41,6 +41,7 @@
> > > Tolapai 0x5032 32 hard yes yes yes
> > > ICH10 0x3a30 32 hard yes yes yes
> > > ICH10 0x3a60 32 hard yes yes yes
> > > + PCH 0x3b30 32 hard yes yes yes
> > >
> > > Features supported by this driver:
> > > Software PEC no
> > > @@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] =
> > > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
> > > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
> > > { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
> > > + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_2) },
> > > { 0, }
> > > };
> > >
> > > @@ -599,6 +601,7 @@ static int __devinit i801_probe(struct p
> > > case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
> > > case PCI_DEVICE_ID_INTEL_ICH10_4:
> > > case PCI_DEVICE_ID_INTEL_ICH10_5:
> > > + case PCI_DEVICE_ID_INTEL_PCH_2:
> > > i801_features |= FEATURE_I2C_BLOCK_READ;
> > > /* fall through */
> > > case PCI_DEVICE_ID_INTEL_82801DB_3:
> > > _
>
> Are you sure? PCI_DEVICE_ID_INTEL_PCH_2 is there in 2.6.27-rc4.
Ah, must have happened overnight, it wasn't there yesterday. I'll
resync my tree now.
--
Jean Delvare
_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c
