I suspect you have a hardware problem, or there may be something you are not doing right. In any event, call your hardware service vendor. If you aren't dong something right, they should be able to walk you through it. If it is a hardware problem, the sooner you get them in the better.
Eric Bielefeld On Sat, 27 Feb 2010 06:02:17 -0800, Anson Ye <[email protected]> wrote: I got a strange problem when I PORed the z10. There are 10 LPARs on channel subsystem 0. After POR finished, I activated the LPARs and tried to load the LPARs. .. But I got load failed. The load message points me to refer the Hardware Message. Then I wen to see the hardware message, the problem description shows below: "An error was detected in the CPC which caused the load operation to fail. " -- There is no other information there, even no disabled wait PSW. The most strange thing is that all the 10 LPARs have the same load problem and the same message.... Is it hardware problem? Could you help me out? Thank you! ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
