When you performed the POR, did you select the correct IOCSDS? -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Anson Ye Sent: Saturday, February 27, 2010 6:02 AM To: [email protected] Subject: LOAD Problem after POR
I got a strange problem when I PORed the z10. There are 10 LPA Hi all, I got a strange problem when I PORed the z10. There are 10 LPARs on channel subsystem 0. After POR finished, I activated the LPARs and tried to load the LPARs. .. But I got load failed. The load message points me to refer the Hardware Message. Then I wen to see the hardware message, the problem description shows below: "An error was detected in the CPC which caused the load operation to fail. " -- There is no other information there, even no disabled wait PSW. The most strange thing is that all the 10 LPARs have the same load problem and the same message.... Is it hardware problem? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
