Never mind. I totally misread your post. You're not having a RACF problem. the S806-4 would likely mean some DSN is not on the LNKLST. I don't know JES3.
-- John McKown Systems Engineer IV IT Administrative Services Group HealthMarkets(r) 9151 Boulevard 26 * N. Richland Hills * TX 76010 (817) 255-3225 phone * john.mck...@healthmarkets.com * www.HealthMarkets.com Confidentiality Notice: This e-mail message may contain confidential or proprietary information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. HealthMarkets(r) is the brand name for products underwritten and issued by the insurance subsidiaries of HealthMarkets, Inc. -The Chesapeake Life Insurance Company(r), Mid-West National Life Insurance Company of TennesseeSM and The MEGA Life and Health Insurance Company.SM > -----Original Message----- > From: IBM Mainframe Discussion List > [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of McKown, John > Sent: Thursday, April 07, 2011 9:57 AM > To: IBM-MAIN@bama.ua.edu > Subject: Re: JES3 on a zPDT running zOS 1.12? > > Can you IPL with JES2 and do some RACF work? If so, then I'd > do the following RACF commands on JES2 to update RACF. Or, if > you have the RACF subsystem active on your system, you could > possibley LOGON to the z/OS console and issue the RACF > commands from there using the RACF subsystem command prefix. > I can do this on our system. The RACF commands would be > something like: > > ADDUSER JES3 NAME('JES3 STC') OWNER(SYS1) NOPASSWORD > DFLTGRP(SYS1) OPERATIONS > > RDEF STARTED JES3.* STDATA(USER(JES3) GROUP(SYS1) TRACE(YES) > TRUSTED(YES)) > > > You should then be able to S JES3 and it should have all the > RACF authority it needs. Likely it will have too much, but at > this point, I'd not really worry about it. > > -- > John McKown > Systems Engineer IV > IT > > Administrative Services Group > > HealthMarkets(r) > > 9151 Boulevard 26 * N. Richland Hills * TX 76010 > (817) 255-3225 phone * > john.mck...@healthmarkets.com * www.HealthMarkets.com > > Confidentiality Notice: This e-mail message may contain > confidential or proprietary information. If you are not the > intended recipient, please contact the sender by reply e-mail > and destroy all copies of the original message. > HealthMarkets(r) is the brand name for products underwritten > and issued by the insurance subsidiaries of HealthMarkets, > Inc. -The Chesapeake Life Insurance Company(r), Mid-West > National Life Insurance Company of TennesseeSM and The MEGA > Life and Health Insurance Company.SM > > > > > -----Original Message----- > > From: IBM Mainframe Discussion List > > [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Don Thimsen > > Sent: Thursday, April 07, 2011 9:23 AM > > To: IBM-MAIN@bama.ua.edu > > Subject: JES3 on a zPDT running zOS 1.12? > > > > We're running two zPDT development systems with the IBM > ADCD zOS 1.12 > > system. I'd like to convert one to a JES3 system for testing. > > I found an older > > webpage that documented the "Steps to Configure JES3 on ADCD": > > > > http://dtsc.dfw.ibm.com/MVSDS/'HTTPD2.ADCD.JES3.HTML($README)' > > > > Note: You may need to cut and paste to view the link. > > > > There were several errors in the setup guide, but were not > > difficult to work > > through. And all the JES3 data sets are available on the > > ADCD system -they > > reside on the ZCPRD2 volume. However, all the datasets were RACF > > protected (according to the VTOC), but there were no entries > > in the RACF > > DB. I used the ADDSD command to set UACC(ALTER) for all the > > JES3 data > > sets. > > > > During the IPL for JES3, the system prompts for the JES3 COLD > > start, and > > after selecting the cold start member it seems to hang: > > > > 09.06.37 *IAT3041 COLD START REQUIRED, ERROR READING > > JESCKPNT > > RECORD > > > > 09.06.37 IAT3011 SPECIFY JES3 START TYPE > > > > 09.06.37 *01 IAT3011 (C, L, H, HA, HR, HAR, W, WA, > > WR, WAR, OR > > CANCEL) > > > > 09.06.37 CMP001I DFSMS COMPRESSION SERVICES > > AVAILABLE > > 09.06.38 IEF404I BLSJPRMI - ENDED - TIME=09.06.38 > > > > 09.06.41 CSV210I LIBRARY LOOKASIDE INITIALIZED > > > > 09.06.44 IRA600I SRM CHANNEL DATA NOW AVAILABLE FOR > > ALL SRM > > FUNCTIONS > > > > 09.07.20 1,c > > > 09.07.20 IEE600I REPLY TO 01 IS;C > > > 09.07.20 IAT2063 ADCD UNABLE TO DETERMINE THE > STATUS OF > > JESXCF GROUP <NAVAIL> - NOT PRESENT IN COMPLEX STATUS > RECORD > > 09.07.20 *02 IAT3012 SELECT JES3 INISH ORIGIN (N > OR M=), AND > > OPTIONAL EXIT PARM (,P=) OR CANCEL > > > 09.07.56 2,m=ft > > > > 09.07.56 IEE600I REPLY TO 02 IS;M=FT > > > > 09.07.56 IAT6369 JES3 WAITING FOR CHECKPOINT DATA SET > > RESERVE > > - CHKPNT ,ZCPRD2,0A86. > > > > 09.07.57 CSV028I ABEND806-04 JOBNAME=IEESYSAS > > STEPNAME=JES3AUX > > 09.07.57 IEF404I IEESYSAS - ENDED - TIME=09.07.57 > > > > 09.08.36 IAT6397 FCT JSS (NODEVICE) HAS BEEN > > DISPATCHED > > CONTINUOUSLY FOR: > > > > 09.08.36 IAT6398 00000 HOURS 00 MINUTES 30 > > SECONDS > > 09.08.37 IAT6415 at 0002BDE2 in LOADMOD=IATINIC , > > > > EPNAME=IATINIC ,EPADDR=00027E70,LEN=004190 > > > > 09.08.37 *03 IAT6418 Reply 'JES3 ' to fail JES3 > > > > INITIALIZATION or 'nnn' to ask later > > > > > > > > At this point, I'm stuck and have zero JES3 experience to > > fall back on. I have > > been reading the RedBook "The ABCs of zOS System Programming > > Volume 13", > > and have successfully run the JES3INFT JES3 parms used for > > the spool format > > through the JES3 verify utility. > > > > Questions: > > > > 1) Is the reserve message on the checkpoint normal? > > > > 2) JES3AUX used to be optional, but in zOS 1.12, JES3 always > > attempts the > > start. Is is required? And does it have it's own proc?? > > > > Any suggestions would be appreciated, > > Don > > > > > ---------------------------------------------------------------------- > > For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@bama.ua.edu with the message: GET > IBM-MAIN INFO > > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
